User's Guide

© Copyright 2014TRENDnet. All Rights Reserved.
68
TRENDnet User’s Guide
TEW-739APBO
Event Log
The Event log displays system events when system is up and running. Also, it becomes
very useful as a troubleshooting tool when issues are experienced in system.
• Time: The date and time when the event occurred.
• Facility: It helps users to identify source of events such “System” or “User”
• Severity: Severity level that a specific event is associated such as “info”, “error”,
“warning”, etc.
• Message: Description of the event.
Click Refresh button to renew the log, or click Clear button to clear all the record.
Associated Client List
List of all clients associated to the access point.
o MAC Address: Display MAC address of WDS peer.
o RSSI: Indicate the signal strength of the respective WDS links.
o TX/RX SEQ: Transmit and receive sequence.
o TX/RX Bytes: Transmit and receive bytes
Remote AP status
List the current status of the remote access point.
o ESSID: SSID of remote access point
o MAC Address: Display MAC address of WDS peer.
o RSSI: Indicate the signal strength of the respective WDS links.
o TX/RX SEQ: Transmit and receive sequence.
o TX/RX Bytes: Transmit and receive bytes
o Status: Display current association status of remote access point
System Management
Configure Management
Administrator could specify geographical location of the system via instructions in this
page. Administrator could also enter new Root and Admin passwords and allow multiple
login methods.
Please click System -> Management and follow the below settings.
• System Information
o System Name: Enter a desired name or use the default one.
o Description: Provide description of the system.
o Location: Enter geographical location information of the system. It helps
administrator to locate the system easier.
• Admin Password: