User's Guide
Table Of Contents
- Introduction
- Applications
- Web Management Interface Instructions
- AP Mode Configuration
- WDS Mode Configuration
- Repeater Mode
- CPE + AP Mode Configuration
- System Management
- Mounting bracket installation
- Appendix
© Copyright 2014TRENDnet. All Rights Reserved.
74
TRENDnet User’s Guide
TEW-739APBO
Wall mount bracket
Align the mounting triangle to the back of the access point. Securely tighten the
mounting triangle by using the M5x10 screws and washers.
Position the provided mounting bracket to the desired location and mount as
shown in the above image using the provided wood screws and plugs.
Pole mount bracket
Insert and fasten the provided clamps to the pole as shown in the above image
using the provided screw washers, spring washers and nuts.