User's Guide

© Copyright 2014TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-739APBO
9
Configuration
1. Open a web browser, type the IP address of the Access Point and then press Enter.
The default IP address is 192.168.10.100.
2. Enter the Username and Password and click OK. By default the Username: root and
Password: root.
3. Click the Wizard button and follow the setup wizard instructions. Click Finish to
complete installation.
Applications
TEW-739APBO is multiple mode system which can be configured either as a wireless
gateway or an access point as desired. It also can be used as a WDS link for Ethernet
network expansion. This section depicts different applications on Router AP Mode, AP
Mode, WDS Mode, CPE Mode, Client Bridge + Universal Repeater Mode and CPE + AP
Mode.
AP Mode (including Access Point + WDS)
An access point can be either a main, relay or remote base station. A main base
station is typically connected to a wired network via the Ethernet port. A relay base
station relays data between main base stations and relay stations or remote base
stations with clients. A remote base station is the end point to accept connections
from wireless clients and pass data upwards to a network wirelessly.
Example 1: Access Point without WDS
• It can be deployed as a tradition fixed wireless Access Point