Data Sheet

Table Of Contents
Specifications
Standards
IEEE 802.3
IEEE 802.3u
IEEE 802.1d
IEEE 802.1p
IEEE 802.1Q
IEEE 802.1X
IEEE 802.11d
IEEE 802.11e
IEEE 802.11f
IEEE 802.11h
IEEE 802.11i
IEEE 802.11b
IEEE 802.11g
IEEE 802.11n (2.4 GHz up to 300 Mbps)
Hardware Interface
1 x 10/100 Mbps port (proprietary PoE max. cable
length 70 m)
Reset button
LED indicators
Special Features
IP67 weather rated
802.1Q VLAN assignment per SSID
DDNS support for dyn.com, no-ip.com
Schedule radio on/off time policy
Access Control
Wireless encryption: WEP, WPA/WPA2-PSK,
WPA/WPA2-RADIUS
Firewall (CPE Mode): NAT, Virtual Server, DMZ
Host, PPTP/L2TP/IPsec VPN Passthrough
Access Controls: MAC, IP Filter, Layer 2 Client
Isolation, Per-SSID client limiting
802.1Q VLAN
QoS
WMM
Diffserv (DSCP)/ToS
802.1p/CoS
Operation Modes
Access Point (AP)
Wireless Distribution System (WDS)
AP + WDS
Repeater
CPE + AP
SSID
Up to 8 SSIDs
Internet Connection Types (CPE mode)
Dynamic IP (DHCP)
Static IP (Fixed)
PPPoE (Dynamic IP/Static IP)
PPTP (Dynamic IP/Static IP)
Management/Monitoring
Local/remote web based management (HTTP,
HTTPS)
Local/remote CLI based management (Telnet,
SSH)
SNMP v1/v2c/v3
SNMP Trap
MIB II
Upgrade firmware
Backup/restore configuration
Event logging
Reboot
Restore to factory defaults
Ping test
Ping Watchdog
Routing
Static
Dynamic (RIP v1/2, OSPF)
Frequency
FCC: 2.412 - 2.462 GHz
ETSI: 2.412 – 2.472 GHz
IC: 2.412 - 2.462 GHz
Wireless Channels
FCC: 1-11
ETSI: 1-13
Modulation
802.11b: DBPK, DQPSK, CCK with DSSS
802.11g/n: BPSK, QPSK, 16-QAM, 64-QAM with
OFDM
Media Access Protocol
CSMA/CA with ACK
Antenna Gain
10 dBi internal sector antenna
Wireless Output Power/Receiving Sensitivity
802.11b: FCC/ETSI: FCC: 28 dBm (max.), ETSI:
10.6 dBm (max.), IC: 28 dBm (max.)/-88 dBm
(typical) @ 11 Mbps
802.11g: FCC/ETSI: FCC: 27 dBm (max.), ETSI:
10.7 dBm (max.), IC: 27 dBm (max.)/- 74 dBm
(typical) @ 54 Mbps
802.11n: FCC/ETSI: FCC: 28 dBm (max.), ETSI:
10.7 dBm (max.), IC: 28 dBm (max.)/- 69 dBm
(typical) @ 300 Mbps
Power
Input: 100 – 220 V, 50 - 60 Hz, 0.6 A
Output: 48v / 0.5A
Consumption: 22 Watts Max.
Operating Temperature
-30 - 60° C (-22 - 140° F)
Operating Humidity
Max. 99% non-condensing
Certifications
CE
FCC
Dimensions
218 x 125 x 54 mm (8.6 x 4.9 x 2.1 in.)
Weight
424 g (0.9 lbs.)
Warranty
3 year limited
Package Contents
TEW-740APBO
CD-ROM (User’s Guide)
Quick Installation Guide
Power adapter (48V DC, 0.5A)
Proprietary PoE injector
Waterproof RJ-45 kit
Grounding wire
Mounting hardware
* Effective wireless coverage may vary depending on the wireless device's output power, antenna gain, antenna alignment, receiving sensitivity, and radio interference. Additionally environmental factors such as weather
conditions, physical obstacles, and other considerations may affect performance. For optimal results, we recommended consulting a professional installer for site survey, safety precautions, and proper installation.
Updated: 6/1/2016
TEW-740APBO
20675 Manhattan Place Torrance CA 90501 USA T: 1-888-326-6061 F: 1-310-961-5511 sales@trendnet.com www.TRENDnet.com
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at any time, without notice. For the most
recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.