User Guide

© Copyright 2016 TRENDnet. All Rights Reserved.
12
TRENDnet User’s Guide
TEW-740APBO
Verify Point-to-Point Configuration/Connectivity
1. Make sure both access points (TEW-740APBO #1 and TEW-740APBO #2) powered on and positioned pointing toward each other.
2. With the static IP address still assigned from the setup guide, connect your computer to one of the access points via LAN port.
3. On your computer, open a command prompt/terminal window and run a ping command to test connectivity to both access point IP addresses 192.168.10.50 and 192.168.10.51.
Example of successful ping replies below from both access points. You can also check if you can access both access point web management pages through a web browser.
C:\Users\trendnet>ping 192.168.10.50
Pinging 192.168.10.50 with 32 bytes of data:
Reply from 192.168.10.50: bytes=32 time<1ms TTL=128
Reply from 192.168.10.50: bytes=32 time<1ms TTL=128
C:\Users\trendnet>ping 192.168.10.51
Pinging 192.168.10.51 with 32 bytes of data:
Reply from 192.168.10.51: bytes=32 time<1ms TTL=128
Reply from 192.168.10.51: bytes=32 time<1ms TTL=128