User Guide
Table Of Contents
- Product Overview
- Setup & Installation
- Note the Wireless MAC Addresses
- TEW-740APBO #1 Configuration
- TEW-740APBO #2 Configuration
- Verify Point-to-Point Configuration/Connectivity
- Grounding Wire Installation
- Waterproof Kit Installation
- Mounting Hardware Installation
- Completed Point to Point Setup and Pole Mount Installation Example
- Installation Tips
- Application Modes
- AP Mode Configuration
- WDS Mode Configuration
- Repeater Mode
- CPE + AP Mode Configuration
- System Management
- Technical Specifications
- Appendix
© Copyright 2016 TRENDnet. All Rights Reserved.
13
TRENDnet User’s Guide
TEW-740APBO
Grounding Wire Installation
To install the grounding wire, align one end of the ground wire over the ground fitting,
then secure the wire using the included screw and washer as shown below.
Waterproof Kit Installation
1. Unscrew the sealing nut from the main body.
2. Separate rubber seal from the claw.
3. Verify that you have the following parts as shown below:
Cable Gland
Seal
Claw
Sealing Nut
4. Insert one end of an Ethernet cable into the sealing nut.