User Guide
Table Of Contents
- Product Overview
- Setup & Installation
- Note the Wireless MAC Addresses
- TEW-740APBO #1 Configuration
- TEW-740APBO #2 Configuration
- Verify Point-to-Point Configuration/Connectivity
- Grounding Wire Installation
- Waterproof Kit Installation
- Mounting Hardware Installation
- Completed Point to Point Setup and Pole Mount Installation Example
- Installation Tips
- Application Modes
- AP Mode Configuration
- WDS Mode Configuration
- Repeater Mode
- CPE + AP Mode Configuration
- System Management
- Technical Specifications
- Appendix
© Copyright 2016 TRENDnet. All Rights Reserved.
24
TRENDnet User’s Guide
TEW-740APBO
802.1d Spanning Tree
The spanning tree network protocol provides a loop free topology for a bridged LAN between LAN interface and 4 WDS interfaces from wds0 to wds3. The Spanning Tree Protocol,
which is also referred to as STP, is defined in the IEEE Standard 802.1d. The Spanning tree always enabled on the access point. Below Figures depict a loop for a bridged LAN between LAN
and WDS link
Click Save button to save your changes. Click Reboot button to activate your changes.
WDS
Remote Base Station
WDS
Blocked by
Spanning Tree Protocol
WDS
Remote Base Station
LOOP
WDS
Remote Base Station
WDS
Blocked by
Spanning Tree Protocol
WDS
Remote Base Station
LOOP
Base Station