User Guide

© Copyright 2016 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-740APBO
70
 MAC Address: The MAC address of the Wireless Station is displayed here.
 Profile Name: Set different profiles for quick connection uses.
 ESSID: Assign Service Set ID for the wireless system.
 Lock to AP MAC: This allows the station to always maintain connection to a
particular AP with a specific MAC address. This is useful as sometimes there can be
few identically named SSID's (AP's) with different MAC addresses. With AP lock on,
the station will lock to MAC address and not roam between several Access Points
with the same ESSID.
 Security Type: Select the desired security type from the drop-down list; the options
are Disable, WEP, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise and
WEP 802.1X.
o Disable: Data are unencrypted during transmission when this option is selected.
 WEP Auth Method: Enable the desire option among OPEN or SHARED
o Key Index: Key index is used to designate the WEP key during data transmission.
4 different WEP keys can be entered at the same time, but only one is chosen.
o WEP Key #: Enter HEX or ASCII format WEP key value; the system supports up to
4 sets of WEP keys.
 WPA-PSK (or WPA2-PSK) : WPA (or WPA2) Algorithms, allows the system accessing
the network by using the WPA-PSK protected access.
o Cipher Suite: By default, it is AES. Select either AES or TKIP cipher suites
o Group Key Update Period: By default, it is 600 seconds. This time interval for
rekeying GTK, broadcast/multicast encryption keys, in seconds. Entering the time-
length is required.
o Master Key Update Period: By default, it is 83499 seconds. This time interval for
rekeying GTK, broadcast/multicast encryption keys, in seconds. Entering the time-
length is required.
o Pre-shared Key: Enter the pre-shared key; the format shall go with the selected
key type.
 WPA-Enterprise (or WPA2-Enterprise): The RADIUS authentication and encryption
will be both enabled if this is selected.