User Guide

© Copyright 2016 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-740APBO
82
o Failure Count To Reboot: specify the number of ICMP “echo response” replies. If
the specified number of ICMP “echo response” packets is not received
continuously, the Ping Watchdog Tool will reboot the device.
Click Save button to save your changes. Click Reboot button to activate your changes
Without a valid certificate, users may encounter the following problem in IE7 when they
try to access system's WMI (https://192.168.2.254). There will be a “Certificate Error”,
because the browser treats system as an illegal website.
Click “Continue to this website” to access the system's WMI. The system's Overview
page will appear.
Configure System Time
System time can be configured via this page and manual setting or via a NTP server is
supported.
Please click on System -> Time Server and follow the below setting.
 Local Time: Display the current system time.
 NTP Client: To synchronize the system time with NTP server.
o Enable: Check to select NTP client.
o Default NTP Server: Select the NTP Server from the drop-down list.
o Time Zone: Select a desired time zone from the drop-down list.
o Daylight saving time: Enable or disable Daylight saving.
Click Save button to save your changes. Click Reboot button to activate your changes.
Configure SNMP Setup
SNMP is an application-layer protocol that provides a message format for
communication between SNMP managers and agents. By enabling SNMP function, the
administrator can obtain the system information remotely.
Please click on System -> SNMP Setup and follow the below setting.
 SNMP v2c Enable: Check to enable SNMP v2c.