User's Guide
Table Of Contents
- Product Overview
- Primary Product Application
- Minimum Installation Requirements
- Model Differences
- TEW-740APBO Setup & Installation
- TEW-740APBO2K Setup and Installation
- Wireless Installation Tips
- Application Modes
- Access your access point management page
- AP Management Settings
- Management Setup
- Set the device date and time
- SNMP Settings
- Backup and restore your AP configuration settings
- Reset your AP to factory defaults
- Soft reboot your AP
- Upgrade your AP firmware
- Network Utilities
- View system information
- View currently connected wireless client devices
- View currently connected authenticated users
- View authentication log information
- View the device system log information
- Configuring additional application modes
- Access Point (AP) Mode
- Set the device to AP mode
- Set the device LAN IP address
- Configure primary wireless network settings
- MAC Address Filter
- DHCP Server
- DHCP Reservation/Static Lease
- 802.11r/802.11k Fast Roaming
- Additional Wireless Settings
- Advanced Wireless Settings
- Wireless WMM QoS Setup
- WDS (Wireless Distribution System)
- Authentication/Captive Portal
- Guest Authentication
- OAuthentication 2.0
- POP3 Server
- Customize Page
- Multiple Language
- Walled Garden
- Privilege Address
- Backup/Restore Authentication Profile & Customized Pages
- Client Bridge + AP Mode
- WISP (CPE) + AP Mode
- Router Mode
- CAP (Control AP) Mode
- Access Point (AP) Mode
- Technical Specifications
- Appendix
© Copyright 2020 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-740APBO / TEW-740APBO2K
1
Product Overview
TEW-740APBO TEW-740APBO2K
Package Contents
TEW-740APBO package includes:
• TEW-740APBO
• Quick Installation Guide
• Power adapter (12V DC, 1A)
• Proprietary/Passive PoE injector
• Grounding wire
• Mounting hardware
• Rubber seal
TEW-740APBO2K package includes:
• 2 x TEW-740APBO
• Quick Installation Guide
• Proprietary/Passive PoE injectors
• Power adapters (12V DC, 1A)
• Grounding wires
• Mounting hardware
• 2 x Rubber seals
Features
TRENDnet’s 10 dBi Outdoor PoE Access Point, model TEW-740APBO, provides wireless
N300 point-to-point connectivity. A variety of installation scenarios are facilitated with
Access Point (AP), Wireless Distribution System (WDS), Client Bridge + AP, Wireless ISP
(WISP) + AP, CPE + AP, and control AP (CAP) modes. The IP56 rated housing is designed
for outdoor environments, and includes wall and pole mounting hardware.
Wireless Modes
Supports Access Point (AP), Wireless Distribution System (WDS), Client Bridge + AP,
Wireless ISP (WISP) + AP, Router, and control AP (CAP) modes
Wireless Modes
Supports Access Point (AP), Wireless Distribution System (WDS), Client Bridge + AP,
Wireless ISP (WISP) + AP, CPE + AP, and control AP (CAP) modes
Wireless N300 (2.4 GHz)
Compliant with 802.11b/g/n technology (2.4 GHz) with data rates up to 300Mbps*
Outdoor Rated
Durable enclosure with an IP56 outdoor weather rating, and an operating temperature
range of -22° – 60° C (-7.6° – 140° F)
Directional Antenna
Built-in 10 dBi directional antenna
PoE Power Adapter
Included passive PoE injector provides power and data over a single Ethernet cable with
a maximum distance of 60m (197 ft.)