User's Guide
Table Of Contents
- Product Overview
- Primary Product Application
- Minimum Installation Requirements
- Model Differences
- TEW-740APBO Setup & Installation
- TEW-740APBO2K Setup and Installation
- Wireless Installation Tips
- Application Modes
- Access your access point management page
- AP Management Settings
- Management Setup
- Set the device date and time
- SNMP Settings
- Backup and restore your AP configuration settings
- Reset your AP to factory defaults
- Soft reboot your AP
- Upgrade your AP firmware
- Network Utilities
- View system information
- View currently connected wireless client devices
- View currently connected authenticated users
- View authentication log information
- View the device system log information
- Configuring additional application modes
- Access Point (AP) Mode
- Set the device to AP mode
- Set the device LAN IP address
- Configure primary wireless network settings
- MAC Address Filter
- DHCP Server
- DHCP Reservation/Static Lease
- 802.11r/802.11k Fast Roaming
- Additional Wireless Settings
- Advanced Wireless Settings
- Wireless WMM QoS Setup
- WDS (Wireless Distribution System)
- Authentication/Captive Portal
- Guest Authentication
- OAuthentication 2.0
- POP3 Server
- Customize Page
- Multiple Language
- Walled Garden
- Privilege Address
- Backup/Restore Authentication Profile & Customized Pages
- Client Bridge + AP Mode
- WISP (CPE) + AP Mode
- Router Mode
- CAP (Control AP) Mode
- Access Point (AP) Mode
- Technical Specifications
- Appendix
© Copyright 2020 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-740APBO / TEW-740APBO2K
56
Privilege Address
System > Authentication > VLAN # > Privilege Address
This section can allow you to set a privileged host addresses that may connect to your
network without the need for authentication.
1. Log into your access point management page (see “Access your access point
management page” on page 28).
2. Click System, click on Authentication, and in the first entry VLAN 0, in the Action
column, and click on drop-down list and click Privilege Address. Review the settings
and click Add to add the entry to the device list and click Save to apply the changes.
• Device Name – Enter device name to easily identify device in the list.
• IP Address: Enter the IP address of the privileged host device.
• MAC Address: Enter the MAC address of the privileged host device.
Backup/Restore Authentication Profile & Customized Pages
System > Authentication > VLAN # > Profile
This section can allow you to backup/restore the authentication profile to your local
drive and also backup/store customized captive portal pages.
1. Log into your access point management page (see “Access your access point
management page” on page 28).
2. Click System, click on Authentication, and in the first entry VLAN 0, in the Action
column, and click on drop-down list and click Profile.
• Download Profile Setting – Click download to back up the authentication profile
to your local drive.
• Upload Profile Setting - Click Browse or Choose File to restore a previously
backed up authentication profile. Click Upload to start the restore process.
• Download Customize Page – Click download to back up the customized captive
portal pages to your local drive.
• Upload Customize Page - Click Browse or Choose File to restore a previously
backed up captive portal page. Click Upload to start the restore process.