User's Guide
Table Of Contents
- Product Overview
- Primary Product Application
- Minimum Installation Requirements
- Model Differences
- TEW-740APBO Setup & Installation
- TEW-740APBO2K Setup and Installation
- Wireless Installation Tips
- Application Modes
- Access your access point management page
- AP Management Settings
- Management Setup
- Set the device date and time
- SNMP Settings
- Backup and restore your AP configuration settings
- Reset your AP to factory defaults
- Soft reboot your AP
- Upgrade your AP firmware
- Network Utilities
- View system information
- View currently connected wireless client devices
- View currently connected authenticated users
- View authentication log information
- View the device system log information
- Configuring additional application modes
- Access Point (AP) Mode
- Set the device to AP mode
- Set the device LAN IP address
- Configure primary wireless network settings
- MAC Address Filter
- DHCP Server
- DHCP Reservation/Static Lease
- 802.11r/802.11k Fast Roaming
- Additional Wireless Settings
- Advanced Wireless Settings
- Wireless WMM QoS Setup
- WDS (Wireless Distribution System)
- Authentication/Captive Portal
- Guest Authentication
- OAuthentication 2.0
- POP3 Server
- Customize Page
- Multiple Language
- Walled Garden
- Privilege Address
- Backup/Restore Authentication Profile & Customized Pages
- Client Bridge + AP Mode
- WISP (CPE) + AP Mode
- Router Mode
- CAP (Control AP) Mode
- Access Point (AP) Mode
- Technical Specifications
- Appendix
© Copyright 2020 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-740APBO / TEW-740APBO2K
58
Connect the device to your wireless network
Wireless > Station Setup
To connect to a wireless network, click on Wireless and click on Station Setup. In the AP
Station List, click on Site Survey to scan for your wireless network.
Find your wireless network and click Setup within the entry.
The AP Station Security Settings at the top left of the page will populate with the
information of the selected wireless network. If security is enabled on the wireless
network, enter the WPA/WPA2 PassPhrase or WEP key in the field provided. Scroll to
the bottom of the page and click Save when you have completed your settings and click
Reboot in the top right menu to reboot the device and commit the changes.
Configure your wireless network settings (WLAN)
Wireless > AP Setup
Verify you have established wireless bridged connectivity by attempting to
communicate to the Internet or access devices or network resources.
To configure the AP wireless settings to allow other wireless clients to connect, click on
Wireless and click on AP Setup. Click Save when you have completed your settings.