User's Guide
Table Of Contents
- Product Overview
- Primary Product Application
- Minimum Installation Requirements
- Model Differences
- TEW-740APBO Setup & Installation
- TEW-740APBO2K Setup and Installation
- Wireless Installation Tips
- Application Modes
- Access your access point management page
- AP Management Settings
- Management Setup
- Set the device date and time
- SNMP Settings
- Backup and restore your AP configuration settings
- Reset your AP to factory defaults
- Soft reboot your AP
- Upgrade your AP firmware
- Network Utilities
- View system information
- View currently connected wireless client devices
- View currently connected authenticated users
- View authentication log information
- View the device system log information
- Configuring additional application modes
- Access Point (AP) Mode
- Set the device to AP mode
- Set the device LAN IP address
- Configure primary wireless network settings
- MAC Address Filter
- DHCP Server
- DHCP Reservation/Static Lease
- 802.11r/802.11k Fast Roaming
- Additional Wireless Settings
- Advanced Wireless Settings
- Wireless WMM QoS Setup
- WDS (Wireless Distribution System)
- Authentication/Captive Portal
- Guest Authentication
- OAuthentication 2.0
- POP3 Server
- Customize Page
- Multiple Language
- Walled Garden
- Privilege Address
- Backup/Restore Authentication Profile & Customized Pages
- Client Bridge + AP Mode
- WISP (CPE) + AP Mode
- Router Mode
- CAP (Control AP) Mode
- Access Point (AP) Mode
- Technical Specifications
- Appendix
© Copyright 2020 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-740APBO / TEW-740APBO2K
79
Authentication Profile
AP Control > Authentication Profile
If you are using the AP authentication feature across multiple APs, this section allows
you to create authentication profiles to apply per VLAN to multiple APs through the
Batch Setup section.
Click AP Control and click on Authentication Profile. Click Create New Profile. Click Save
to save the new authentication profile.
• Profile Name –Enter a name to identify this authentication profile.
• Description – Enter a brief text description to help further provide detail about
the profile.
After you have created the new profile, in the entry in the list, click on the drop-down
arrow next to Authentication. You’ll be able to create the customized authentication
settings for the newly created profile. After you created your customized authentication
profile, the profile can be applied to multiple APs under AP Control > Batch Setup.
Managed AP Status
AP Control > Status
This section provides status information about all of the current APs managed by the
CAP mode AP.
Click AP Control and click on Status.