User's Guide
Table Of Contents
- Product Overview
- Primary Product Application
- Minimum Installation Requirements
- Model Differences
- TEW-740APBO Setup & Installation
- TEW-740APBO2K Setup and Installation
- Wireless Installation Tips
- Application Modes
- Access your access point management page
- AP Management Settings
- Management Setup
- Set the device date and time
- SNMP Settings
- Backup and restore your AP configuration settings
- Reset your AP to factory defaults
- Soft reboot your AP
- Upgrade your AP firmware
- Network Utilities
- View system information
- View currently connected wireless client devices
- View currently connected authenticated users
- View authentication log information
- View the device system log information
- Configuring additional application modes
- Access Point (AP) Mode
- Set the device to AP mode
- Set the device LAN IP address
- Configure primary wireless network settings
- MAC Address Filter
- DHCP Server
- DHCP Reservation/Static Lease
- 802.11r/802.11k Fast Roaming
- Additional Wireless Settings
- Advanced Wireless Settings
- Wireless WMM QoS Setup
- WDS (Wireless Distribution System)
- Authentication/Captive Portal
- Guest Authentication
- OAuthentication 2.0
- POP3 Server
- Customize Page
- Multiple Language
- Walled Garden
- Privilege Address
- Backup/Restore Authentication Profile & Customized Pages
- Client Bridge + AP Mode
- WISP (CPE) + AP Mode
- Router Mode
- CAP (Control AP) Mode
- Access Point (AP) Mode
- Technical Specifications
- Appendix
© Copyright 2020 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-740APBO / TEW-740APBO2K
81
• Upgrade firmware
• Backup/restore configuration
• Event logging
• Authentication log
• Reboot
• Restore to factory defaults
• Ping test
• Traceroute
• LED Control
Frequency
• FCC: 2.412 - 2.462GHz
• ETSI: 2.412 – 2.472GHz
• IC: 2.412 - 2.462GHz
Wireless Channels
• FCC: 1-11
• ETSI: 1-13
Modulation
• 802.11b: DBPK, DQPSK, CCK with DSSS
• 802.11g/n: BPSK, QPSK, 16-QAM, 64-QAM with OFDM
Media Access Protocol
• CSMA/CA with ACK
Antenna Gain
• 10 dBi internal sector antenna
Wireless Output Power
• 802.11b: FCC: 26 dBm (max.) / CE: 10.4 dBm (max.) / IC: 26 dBm (max.) @ 11Mbps
• 802.11g: FCC: 25 dBm (max.), CE: 10.5 dBm (max.) / IC: 25 dBm (max.) @ 54Mbps
• 802.11n: FCC: 28 dBm (max.), CE: 10.6 dBm (max.) / IC: 28 dBm (max.) @ 150Mbps
• 802.11n: FCC: 27 dBm (max.), CE: 10.6 dBm (max.) / IC: 27 dBm (max.) @ 300Mbps
Receiving Sensitivity
• 802.11b: -88 dBm (typical) @ 11Mbps
• 802.11g: -74 dBm (typical) @ 54Mbps
• 802.11n: -71 dBm (typical) @ 150Mbps
• 802.11n: -69 dBm (typical) @ 300Mbps
Power
• Input: 100 – 220V AC, 50/60Hz, 0.5A
• Output: 12V DC, 1A proprietary/passive PoE injector
• Max. Consumption: 6.6W
Operating Temperature
• -22° – 60° C (-7.6° – 140° F)
Operating Humidity
• Max. 99% non-condensing
Certifications
• FCC
• CE
• IC
Dimensions
• 195 x 118 x 61mm (7.6 x 4.6 x 2.4 in.) per access point
Weight
• 304g (10.7 oz.) per access point
Disclaimer
* Effective wireless coverage may vary depending on the wireless device's output power, antenna
gain, antenna alignment, receiving sensitivity, and radio interference. Additionally, environmental
factors such as weather conditions, physical obstacles, and other considerations may affect
performance. For optimal results, we recommended consulting a professional installer for site
survey, safety precautions, and proper installation.