Datasheet

ManualsBrandsTRENDnet ManualsComputers & Laptops10dBi Wireless N300 Outdoor PoE Preconfigured Point-to-Point Bridge Bundle Kit, 2 x Preconfigured Wireless N Access Poi

Table Of Contents

10 dBi Wireless N300 Outdoor PoE Preconﬁgured Point-

to-Point Bridge Kit

TEW-740APBO2K (v3.0R)

• Wireless N300 point-to-point networking (2.4 GHz)

• Includes two preconﬁgured wireless N access points

• IP56 outdoor weather rated housing

• Built-in 10 dBi directional antenna

• Supports Access Point, WDS Bridge, WDS Access Point, WDS Station, and Client Bridge modes

• Proprietary PoE power adapters included

• 1 x 10/100Mbps PoE-in port, and 1 x 10/100Mbps port

TRENDnet's 10 dBi Wireless N300 Outdoor PoE Preconﬁgured Point-to-Point Bridge Kit, model TEW-740APBO2K, is the easiest

way for you to provide long-distance, point-to-point wireless connectivity. The long-range outdoor access point kit is ideal for use with

building-to-building communications, utility poles, surveillance solutions, and more.

Reduce installation time and infrastructure costs. This preconﬁgured directional point-to-point bridge kit is ready to install out of the

box, with no additional WiFi conﬁgurations required*. Conveniently link two locations together with Wireless N300 speeds and

performance, especially when you are unable to run network cables.

The durable access point housing is IP56 weather rated housing, and designed and tested for harsh, outdoor environments. This

long-range outdoor access point bridge kit features built-in, high-performance 10 dBi antennas, and conveniently includes both wall

and pole mounting hardware for installation ﬂexibility.

TEW-740APBO2K

Summary of content (5 pages)

PAGE 1
TEW-740APBO2K 10 dBi Wireless N300 Outdoor PoE Preconﬁgured Pointto-Point Bridge Kit TEW-740APBO2K (v3.0R) • Wireless N300 point-to-point networking (2.
PAGE 2
TEW-740APBO2K Preconﬁgured Point-to-Point Bridge Reduce installation cost and setup time with this preconﬁgured, and pre-encrypted longrange outdoor wireless access point bridge kit. PoE Power Adapter Outdoor Ready Included passive PoE injector provides power and data over a single Ethernet cable with a maximum distance of 60m (197 ft.). Durable enclosure with an IP56 outdoor weather rating, and an operating temperature range of -22° – 60° C (-7.6° – 140° F).
PAGE 3
TEW-740APBO2K FEATURES Preconﬁgured Kit Wireless N300 (2.4 GHz) Outdoor Rated Reduce installation and setup time with this preconﬁgured and preencrypted long-range outdoor wireless access point bridge kit Compliant with 802.11b/g/n technology (2.4 GHz) with data rates up to 300Mbps** Durable enclosure with an IP56 outdoor weather rating, and an operating temperature range of -22° – 60° C (-7.
PAGE 4
TEW-740APBO2K SPECIFICATIONS Standards • IEEE 802.3 • IEEE 802.3u • IEEE 802.1d • IEEE 802.1p • IEEE 802.1Q • IEEE 802.1X • IEEE 802.11d • IEEE 802.11e • IEEE 802.11f • IEEE 802.11h • IEEE 802.11i • IEEE 802.11b • IEEE 802.11g • IEEE 802.11k • IEEE 802.11n (2.4GHz up to 300Mbps) • IEEE 802.11r Hardware Interface • 1 x 10/100Mbps LAN1 port (proprietary PoE max. cable length 60m (197 ft.
PAGE 5
TEW-740APBO2K Weight • 304g (10.7 oz.) per access point Warranty • 3 year Package Contents • 2 x TEW-740APBO • Quick Installation Guide • Proprietary/Passive PoE injectors • Power adapters (12V DC, 1A) • Grounding wires • Mounting hardware • 2 x Rubber seals * For future troubleshooting, we recommend assigning the APs valid IP addresses within your existing network.