Manualshelf

Installation Manual

ManualsBrandsTRENDnet ManualsComputers & Laptops10dBi Wireless N300 Outdoor PoE Preconfigured Point-to-Point Bridge Bundle Kit, 2 x Preconfigured Wireless N Access Poi
11121314151617181920
ENGLISHFRANÇAISDEUTSCH
ESPAÑOLРORTUGUÊS
10
22. Click on the Wireless tab and select WDS Setup.
WDS Setup
Wireless
24. Under WDS Client Setup, check the first entry and enter the WiFi MAC address of
TEW-740APBO #2. Then click Save.
Note: When configuring the TEW-740APBO #2, enter the WiFi MAC address of TEW-740APBO #1.
23. Click Enabled for the WDS Setup and under Authentication, select AES. Enter a WDS
PassPhrase (8-63 alphanumeric characters).
Note: When configuring TEW-740APBO Unit #2, the WDS AES Passphrase must be the same as
TEW-740ABPO #1.