User Guide

© Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-755AP
21
Scan for wireless networks
Wireless 2.4GHz > Wireless Network
This section outlines the available features to configure wireless 2.4GhH when Access
Point mode is selected.
1. Log into your management page (see “Access the management page” on page 16).
2. Click on the Wireless 2.4GHz
3. Under SSID section click Site Survey to wireless scan for available wireless networks.
4. Click on the wireless network you would like to connect. The information will
automatically fill on the previous screen. You will then need to select and enter the
wireless security.
5. Click on Save/Reload button located on the top left section to apply settings.
WDS
1. Log into your management page (see “Access the management page” on page 16).
2. Click on System and Operation Modes.
3. Select the WDS and click Apply.
4. Click on Save/Reload button located on the top left section to apply settings.