User Guide

© Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-755AP
33
Configure log
Management > Log
1. Log into your management page (see “Access the management page” on page 16).
2. Click on the Management tab and click Log. Click apply to save settings
 Enable System log: Select option to enable system log feature
 Syslog Server IP Address: Enter the IP address of the syslog server or select from
the pull down menu
 Local Log: Select enable to enable local log feature
4. Click on Save/Reload button located on the top left section to apply settings.
Test connectivity
Management > Diagnostics
Ping Test
1. Log into your management page (see “Access the management page” on page 16).
2. Click on the Management tab and click Diagnostic.
 IP : Enter the IP address you would like to conduct the ping test
 Packet Length: Enter the packet size
 Number of Pings: Enter the amount of pings to conduct.
 Ping: Click to start ping test
TraceRoute
1. Log into your management page (see “Access the management page” on page 16).
2. Click on the Management tab and click Diagnostic.
 Target: Enter the IP address to conduct traceroute test
 Traceroute: Click to start traceroute test
Check system information
Status > Main
1. Log into your management page (see “Access the management page” on page 16).
2. Click on the Status tab and click Main.
3. Review the device information.
System
 Device Name: Displays the assigned device name
 Firmware Version: Displays the firmware version currently loaded on the router
 System Time: Displays the current time of the device
 System Up Time: Displays the time duration of how long the device has been
running