User Guide

© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-755AP
28
Internal Captive Portal
Note: The internal captive portal function works on HTTP web port 80. Once enabled, in
order to log back in to the access point management page, when prompted for
credentials in the captive portal page, enter the access point administrator user name
and password (default: admin / admin). After you have logged into the captive portal
page with the access point administrative account, you will be redirected to the main
access point management page for device configuration.
1. Log into your management page (see “Access the management page” on page 13.
2. Click on the System tab and click Captive Portal.
3. Choose the Captive Portal mode Internal Captive Portal.
4. For the Captive Portal setting, click the drop-down and select Enable to enable
Internal Captive Port authentication. Tick the which SSIDs to apply and require the
internal captive port authentication function. The authentication timeout specifies the
maximum amount of time a user can be logged in and authentication before
automatically logging out the user. Click Save when you have completed these settings.
5. The internal captive portal section allows you to upload images for basic
customization of the captive port login page. One image can be set the logo and another
image can be set as the background image. Click on Browse or Choose File, navigate and
select the image file to be uploaded and click Upload.
Note: Recommended image formats are JPG, PNG, GIF. Maximum file size for images is
250KB.
6. After you have selected the image file, you can choose to Delete the image or remove
the file, Set as background or Set as Logo. Click Save to save the image settings.