User Guide
Table Of Contents
- Product Overview
- Configuration
- Wireless Networking and Security
- Advanced configuration
- Access Point
- Client Bridge
- WDS
- Repeater
- Basic
- Scan for wireless networks
- Advanced wireless settings
- Roaming Support (802.11k)
- RSSI Scanner
- IPv6 Settings
- Local Connection Only
- Static IPv6
- Auto Configuration (SLAAC/DHCPv6)
- Change your IP address
- Captive Portal
- Configure Spanning Tree
- Set date and time
- Daylight Saving Time
- NTP
- Manual
- Manage VLAN
- Traffic Shaping
- Enable SNMP
- Enable CLI
- LED Controls
- Maintenance & Monitoring
- AP utility
- Technical Specifications
- Troubleshooting
- Appendix
© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-755AP
29
7. Scroll down to check the login page preview. In the message area, you can enter in
text which will be displayed on your login page visible by your users. You can enter in
basic html tags also for text formatting. Click Save when you have finished entering your
text content.
8. In the Setting Username and Password section, enter your user accounts in the fields
provided. Up to 10 user accounts are supported. Users will be required to enter user
name and password for the accounts defined in this section.
9. Click on Apply button to apply the settings and then click on the Save/Reload button
located on the top left section to save the settings.
Redirect URL
This function is used to automatically redirect the user to a specified website
immediately after user has authenticated for either captive port mode. This feature can
be used for marketing, promotions, to users to web content created by you or your
company or maybe a partner.
1. Log into your management page (see “Access the management page” on page 13.
2. Click on the System tab and click Captive Portal.
3. Choose the Captive Portal mode Redirect URL.
4. To enable the Redirect URL function, click on the Redirection drop-down setting and
select Enabled. In the Redirect URL field, enter the URL/web address to redirect the user
to after login. Tick which SSIDs this function will be applied.
Note: Only SSIDs with the captive portal function enabled can apply this function.
5. Click on Apply button to apply the settings and then click on the Save/Reload button
located on the top left section to save the settings.