User`s guide

TRENDnet User’s Guide

TEW-820AP

Create schedules

Tools > Schedule

For additional security control, your router allows you to create schedules to specify a

time period when a feature on your access point should be activated and deactivated.

1. Log into your access point management page (see “

Access your access point

management page” on page 8).

2. Click on Main, and click on Time.

3. Review the Schedule settings. Click Apply to save settings.

• Name: Enter a name for the schedule you would like to apply.

• Days: Check the days you would like the rule to be applied or select All Week to

enable the rule all week.

• Time format: Select from the pull down menu the time format to use.

• Start/End Time: Select the start and end time you would like the schedule to follow.

Note: The schedule defined will define the time/day the feature will be activated.

Access Point Maintenance & Monitoring

Reset your Access Point to factory defaults

Tools > Settings Management

You may want to reset your access point to factory defaults if you are encountering

difficulties with your access point and have attempted all other troubleshooting. Before

you reset your access point to defaults, if possible, you should backup your access point

configuration first, see “

Backup and restore your access point configuration settings” on

page 35.

There are two methods that can be used to reset your access point to factory defaults.

• Reset Button – Located on the rear panel of your access point, see “

Product

Hardware Features” on page 2. Use this method if you are encountering

difficulties with accessing your access point management page.

• Access Point Management Page

1. Log into your access point management page (see “

Access your access point

management page” on page 8).

2. Click on Tools and click on Settings Management.

3. Under Restore Factory Default Settings section, click Restore Default. When

prompted to confirm this action, click OK.