User`s guide

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-820AP
38
• From Email Address: Enter the recipient email address to use
• To Email Address: Enter the email address to send the logs
• Email Subject: Enter the email subject to use when logs are sent
• SMTP Server Address: Enter the SMTP server address of the email address used
• SMTP Port: Enter the SMTP port used on the email address
• Enable Authentication: Select this option to authenticate the email address
• Account Name: Enter the account name used on the email address
• Password: Enter the password of the email address used.
Wireless Client List
Status > Wireless Clientt
You can view the list of active wireless devices currently connected to your access point.
1. Log into your access point management page (see “
Access your access point
management page” on page 8).
2. Click on Status, and click on Wireless Client.
• Connected Time: Displays the duration time of your wireless client
• MAC Address: Displays the current MAC address of your wireless client.
.
Check the access point system information
Status > Device Info
You may want to check the system information of your access point such as IP address
settings, access point mode, wireless and wired network settings, access point wireless
MAC addresses, and firmware version.
1. Log into your access point management page (see “
Access your access point
management page” on page 8).
2. Click on Status and click on Device Info.
Device Info
• Firmware Version: The current firmware version your access point is running.
• System Up Time: The duration your access point has been running continuously
without a restart/power cycle (hard or soft reboot) or reset.