User`s guide

TRENDnet User’s Guide

TEW-823DRU

Parental Control

Basic > Parental Control

Parental control settings allow you to set up restrictions/filters specifically who is

allowed or denied access to your network for a specified period of time and restricted

access to web content.

Access Rule (MAC/IP Filter)

Basic > Parental Control

Every network device has a unique, 12-digit MAC (Media Access Control) address. Every

network device must be assigned or configured with a specific IP address in order to

communicate with your network which is typically assigned by your router DHCP server

automatically. Using access rules, you can deny specific computers and other devices

from using this router’s wired or wireless network by specifying the MAC address or IP

address.

1. Log into your router management page (see “Access your router management page

”

on page 9).

2. Click on Basic, click on Parental Control.

3. Check Enabled to enable the access rule.

4. Enter a Rule Name.

5. Select which Address Type to apply the filter. (MAC Address or IP Address)

Note: If you device is not listed, please refer to your computer or device documentation

to find the MAC address.

6. Manually enter the MAC Address or IP Address in the field.

Note: If the network device is connected to your router, you can also click the drop-down

list to choose one of the network devices (MAC Address/IP Address) detected by your

router.

7. Schedule (Optional) – The schedule function allows you to define a schedule when

the access should be active and blocking the specified MAC address or IP address. To

define a new schedule, click New Schedule and refer to page 33 “ Create Schedules

”.

After you have created a new schedule, click the drop-down list and the new schedule

will be available for selection. Note: Before applying scheduling, please ensure your Time

settings are configured correct and you have defined a schedule. See page 32 to

configure

Time Settings and see page 33 “ Create Schedules” to create a schedule.

8. Click Add to add the access rule to the Access Rule List. Wait of the rule to be added.

Note: Clicking Reset will discard your settings and clear all fields.

Note: In the Access Rule List, you can edit a rule by clicking under the Edit column

next to the rule you would like to edit. You can also delete a rule by clicking under

the Delete column next to the rule you would like to delete.