User's Guide
Table Of Contents
- Product Overview
- Router Setup
- Basic Router Settings
- Qualcomm® StreamBoost™
- Wireless Networking and Security
- Advanced Router Settings
- Change your router login password
- Manually configure your Internet connection
- IPv6 Settings
- Clone a MAC address
- Change your router IP address
- Set up the DHCP server on your router
- Set up DHCP reservation
- Enable/disable UPnP on your router
- Enable/disable Application Layer Gateways (ALG)
- Allow/deny multicast streaming
- Identify your network on the Internet
- Set your router date and time
- Create schedules
- Access Control (IP Protocol Filter)
- Inbound Filter
- Open a device on your network to the Internet
- Virtual Server
- Allow remote access to your router management page
- Using External USB Storage
- Virtual Private Networking (VPN)
- Router Maintenance & Monitoring
- Reset your router to factory defaults
- Router Default Settings
- Backup and restore your router configuration settings
- Reboot your router
- Upgrade your router firmware
- Allow/deny ping requests to your router from the Internet
- How to capture network packets
- Diagnostic Tools
- Wireless Client List
- Check the router system information
- View your router log
- Router Management Page Structure
- Technical Specifications
- Appendix
© Copyright 2016 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-827DRU
19
My Network
Basic > Qualcomm® StreamBoost™ > My Network
The My Network page provides a visual of your network by generating a network map of
the devices connected to your router and the upstream and downstream bandwidth
utilization. Click on the router icon to view an entire list of the devices connected to
your router or click on any of the connected devices to view more details of the
bandwidth utilization per application of each device. The arrows display the
downstream and upstream bandwidth for each device including router and Internet.
You can also click the Show drop down menu to display all Active Devices (default) or All
Devices (includes inactive devices).
Router Node View
The Router Node View page displays each device and their bandwidth usage, you can
click each device to display a list of the active applications used by the device(s) and the
per application bandwidth usage. The top bar next to each device is the upstream
bandwidth and the lower bar is the downstream bandwidth.
The graphs below will display the bandwidth utilization of the devices within one
minute. The blue area displays the bandwidth usage of the selected device in the list.
The white areas are the bandwidth utilizations of other devices.