User's Guide
Table Of Contents
- Product Overview
- Router Setup
- Basic Router Settings
- Qualcomm® StreamBoost™
- Wireless Networking and Security
- Advanced Router Settings
- Change your router login password
- Manually configure your Internet connection
- IPv6 Settings
- Clone a MAC address
- Change your router IP address
- Set up the DHCP server on your router
- Set up DHCP reservation
- Enable/disable UPnP on your router
- Enable/disable Application Layer Gateways (ALG)
- Allow/deny multicast streaming
- Identify your network on the Internet
- Set your router date and time
- Create schedules
- Access Control (IP Protocol Filter)
- Inbound Filter
- Open a device on your network to the Internet
- Virtual Server
- Allow remote access to your router management page
- Using External USB Storage
- Virtual Private Networking (VPN)
- Router Maintenance & Monitoring
- Reset your router to factory defaults
- Router Default Settings
- Backup and restore your router configuration settings
- Reboot your router
- Upgrade your router firmware
- Allow/deny ping requests to your router from the Internet
- How to capture network packets
- Diagnostic Tools
- Wireless Client List
- Check the router system information
- View your router log
- Router Management Page Structure
- Technical Specifications
- Appendix
© Copyright 2016 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-827DRU
3
Product Hardware Features
Rear View
No
Item
Description
1
LED On/Off Button
Push to turn front panel LEDs on or off.
2
USB 3.0 Ports
Connect USB storage devices to share over the
network via FTP or Windows® SMB/CIFS, Samba,
BitTorrent client, iTunes Server, and DLNA server.
3
WPS Button (Wi-Fi
Protected Setup)
Push and hold this button for 3 seconds and release to
activate WPS. The Power LED on front panel will blink
when WPS is activated.
4
Gigabit LAN Ports 1-4
(Black)
Connect Ethernet cables (also called network cables)
from your router LAN ports to your wired network
devices.
5
Gigabit WAN/Internet
Port
(Yellow)
Connect an Ethernet cable from your router Internet
port to your modem.
6
WiFi On/Off Button
Push and hold this button for 5 seconds and release to
turn WiFi (2.4GHz & 5GHz) on or off. It may take up to
15 to completely turn on or off WiFi after the button is
released. The 2.4G and 5G LEDs will turn on or off to
indicate the WiFi status.
7
Reset Button
Using a pen or paperclip, push and hold the reset
button for 15 seconds and release to reset the router.
8
On/Off Power Switch
Push the router On/Off power switch to turn your
router “On” (Inner position) or “Off” (Outer position).
9
Power Port
Connect the included power adapter from your router
power port and to an available power outlet.
1
2
3
5
6
7
8
9
4