TRENDnet User’s Guide Cover Page
TRENDnet User’s Guide Table of Contents Product Overview ...........................................................................1 Package Contents .......................................................................................................... 1 Features ......................................................................................................................... 2 Product Hardware Features...........................................................................................
TRENDnet User’s Guide Table of Contents Add static routes .......................................................................................................... 49 Wireless Client List ...................................................................................................... 67 Enable Dynamic Routing .............................................................................................. 50 Check the router system information .......................................................
TEW-827DRU TRENDnet User’s Guide Package Contents Product Overview In addition to your router and 4 detachable high gain antennas, the package includes: If any package contents are missing or damaged, please contact the retail store, online retailer, or reseller/distributor from which the product was purchased. TEW-827DRU © Copyright 2018 TRENDnet. All Rights Reserved.
TEW-827DRU TRENDnet User’s Guide Features Guest Network TRENDnet’s AC2600 MU-MIMO WiFi Router, model TEW-827DRU, is built to perform in a busy connected home. It generates two quad-stream WiFi networks—a 1,733Mbps WiFi AC and a concurrent 800Mbps WiFi N network. MU-MIMO technology processes multiple data streams simultaneously, increasing real-time WiFi performance when multiple devices access the network. Use the gigabit Ethernet ports and USB 3.0 share port to further extend network connectivity.
TEW-827DRU TRENDnet User’s Guide Product Hardware Features Rear View No 1 Item USB 3.0 Port 2 Gigabit LAN Ports 1-4 (Black) 3 Gigabit WAN/Internet Port (Yellow) WPS Button (Wi-Fi Protected Setup) 4 5 On/Off Power Switch 6 Power Port 7 Reset Button Description Connect USB storage devices to share over the network via FTP or Windows® SMB/CIFS, Samba, BitTorrent client, iTunes Server, and DLNA server.
TEW-827DRU TRENDnet User’s Guide Front View No 1 Item Power/WPS LED 2 Internet Port LED 3 Gigabit LAN Ports 1-4 LEDs 4 2.4GHz/5GHz Wireless LEDs 5 USB LED Application Diagram Description Solid Blue – Device is on Blinking Blue – WPS is activated. Off – No power Solid Blue – Internet port is physically connected Blinking Blue – Data Transmit/Receive. Off – Internet port is physically disconnected. Solid Blue – LAN port is physically connected Blinking Blue – Data Transmit/Receive.
TEW-827DRU TRENDnet User’s Guide Router Setup 2. Make sure that your modem is working properly. Your modem is often provided by your Internet Service Provider (ISP) when you sign up for Internet service. If your modem is not working contact your ISP to verify functionality. Creating a Home Network 3. Set up your router. See “How to setup your router” below. What is a network? A network is a group of computers or devices that can communicate with each other.
TRENDnet User’s Guide Router Installation TEW-827DRU MTU:_______ (Default: 1500, change if required by ISP) MAC Address: ___:___:___:___:___:___ Clone your PC MAC Address (Optional) Before you Install Many Internet Service Providers (ISPs) allow your router to connect to the Internet without verifying the information fields listed below.
TEW-827DRU TRENDnet User’s Guide Hardware Installation 1. Attach the antennas to the router and position them for the best WiFi coverage. It is recommended that you position all of the antennas vertically as shown below. 7. Connect the power adapter to the router and then to a power outlet. Push the power on the back of the router to the On (Inner) position. 2. Verify that you have an Internet connection when connecting your computer directly to your modem. 8. Turn on your modem. 9.
TRENDnet User’s Guide TEW-827DRU Setup Wizard 1. Open your web browser (e.g. Internet Explorer, Firefox, Safari, Chrome, or Opera) and the wizard will automatically appear. Note: If you have already configured your router before, the wizard will no longer appear automatically. In your web browser, go to http://tew-827dru or you can access the router management using the default IP address http://192.168.10.1. Your router will prompt you for a user name and password.
TRENDnet User’s Guide TEW-827DRU Connect additional wired devices to your network You can connect additional computers or other network enabled devices to your network by using Ethernet cables to connect them to one of the available LAN ports labeled 1,2,3,4 on your router. Note: If you encounter issues connecting to your network, there may be a problem with your computer or device network settings.
TEW-827DRU TRENDnet User’s Guide Basic Router Settings Network Status Basic > Network Status Access your router management page Note: Your router management page URL/domain name http://tew-827dru or IP address http://192.168.10.1 is accessed through the use of your Internet web browser (e.g. Internet Explorer®, Firefox®, Chrome™, Safari®, Opera™) and will be referenced frequently in this User’s Guide. 1. Open your web browser and go to URL/domain name http://tew-827dru or IP address http://192.168.10.1.
TEW-827DRU TRENDnet User’s Guide Internet: The Internet icon displays green to indicate that your router has successfully established an Internet connection. The Internet icon displays orange to indicate that a physical connection has been established on the Internet port of the router but with no successful Internet connection has been established. The Internet icon displays red to indicate that the Internet is physically disconnected.
TRENDnet User’s Guide Wireless Settings Basic > Wireless (2.4GHz or 5GHz) This section outlines available management options under basic wireless sub tab for both 2.4GHz and 5GHz wireless sections. You can refer to the page 18 Wireless Networking & Security to configure your wireless security settings. 1. Log into your router management page (see “Access your router management page” on page 10). 2. Click on Wireless and click on Basic scroll down to Wireless Network Settings (2.4GHz or 5GHz) 3.
TEW-827DRU TRENDnet User’s Guide Frequency (Channel) – Selecting the AutoSelect option will set your router to scan for the appropriate wireless channel to use automatically. Click the drop-down list and select the desired Channel for wireless communication. The goal is to select the Channel that is least used by neighboring wireless networks. Channel Width: Select the appropriate channel width for your wireless network. This setting only applies to 802.11n and 802.11ac. For greater 802.
TRENDnet User’s Guide TEW-827DRU primary. You can reference your guests to access this network instead of the primary. Internet Access Only – When this option is checked, wireless client devices connected to your guest network(s) will be restricted from accessing your private LAN and wireless clients connected to your primary wireless network and allowed Internet access only.
TRENDnet User’s Guide TEW-827DRU Parental Control Basic > Parental Control Parental control settings allow you to set up restrictions/filters specifically who is allowed or denied access to your network for a specified period of time and restricted access to web content. 5. Select which Address Type to apply the filter. (MAC Address or IP Address) Note: If you device is not listed, please refer to your computer or device documentation to find the MAC address.
TRENDnet User’s Guide TEW-827DRU 8. To define the time slots to allow access for specific days, simply click on a box corresponding to the day and time slot allocated and the box will turn blue indicating that access has been allowed for that period on that day. For example: To allow access on Tuesdays and Wednesdays from 5AM to 6AM, click on those corresponding boxes. When finished setting the time slots allowed, click OK. 9. Click Save to add the rule to the table.
TEW-827DRU TRENDnet User’s Guide Website Filter Basic > Parental Control You may want to block computers or devices on your network access to specific websites (e.g. www.xxxxxxxxx.com, etc.), also called domains or URLs (Uniform Resource Locators). You may also apply a schedule when these websites are allowed or denied. 8.
TEW-827DRU TRENDnet User’s Guide Wireless Networking and Security How to choose the type of security for your wireless network Setting up wireless security is very important. Leaving your wireless network open and unsecure could expose your entire network and personal files to outsiders. TRENDnet recommends reading through this entire section and setting up wireless security on your new router.
TEW-827DRU TRENDnet User’s Guide Secure your wireless network Selecting WEP: Basic > Wireless If selecting WEP (Wired Equivalent Privacy), please review the WEP settings. To save changes to this section, click Save when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply & Reboot.
TEW-827DRU TRENDnet User’s Guide Selecting WPA-PSK / WPA2-PSK/ WPA2-PSK Mixed (WPA2-Personal recommended): Selecting WPA / WPA2 / WPA2-Enterprise Mixed (WPA2-Personal recommended): In the Security Mode drop-down list, select WPA-PSK, WPA2-PSK, or WPA2-PSK Mixed. Please review the WPA-Personal settings.To save changes to this section, click Save when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply & Reboot.
TEW-827DRU TRENDnet User’s Guide Connect wireless devices to your router Connect wireless devices using WPS A variety of wireless network devices can connect to your wireless network such as: WPS (Wi-Fi Protected Setup) is a feature that makes it easy to connect devices to your wireless network. If your wireless devices support WPS, you can use this feature to easily add wireless devices to your network.
TEW-827DRU TRENDnet User’s Guide PBC (Software/Virtual Push Button) PIN (Personal Identification Number) Advanced > Wireless (2.4GHz or 5GHz) > WPS Advanced > Wireless (2.4GHz or 5GHz) > WPS In addition to the hardware push button located physically on your router, the router management page also has push button which is a software or virtual push button you can click to activate WPS on your router.
TEW-827DRU TRENDnet User’s Guide Advanced wireless settings To configure multiple SSID on your router: The advanced wireless features provide can provide you with additional options for setting up your wireless network such as multiple SSID and WDS (Wireless Distribution System) or wireless bridging. 1. Log into your router management page (see “Access your router management page” on page 10). Multiple SSID 2. Click on Advanced and click on Wireless (2.4GHz or 5GHz), then click on Multiple SSID.
TEW-827DRU TRENDnet User’s Guide Please refer to page 18 to find out about different security types and page 19 for wireless security configuration. The diagram shows an example of a client connecting to SSID 1 and another client connecting to SSID 2. Wireless bridging using WDS (Wireless Distribution System) Advanced > Wireless (2.
TEW-827DRU TRENDnet User’s Guide Note: Before configuring WDS, please ensure the following first: 4. Under Security, configure the encryption type to use. 1. Make sure different IP addresses are assigned to each WDS supported wireless device used for bridging. (ex. 192.168.10.1,192.168.10.2, 192.168.10.3) to avoid IP address conflict. See page 33 for changing the LAN IP address. Note: Only WEP security is supported for WDS. You can find more information on wireless security on page 18. 2.
TRENDnet User’s Guide TEW-827DRU Wireless Client Bridge Mode Advanced > Setup > Device Mode Wireless client bridge mode The function of client bridge mode is to extend wireless connectivity to multiple wired Ethernet client devices. A typical application where this mode may be used is in your home entertainment/media center where multiple network enabled media devices require Internet or network connectivity such as an HD smart TV, game console, set top box, or DVR.
TRENDnet User’s Guide TEW-827DRU 5. Select the network you would like to connect to in the list by clicking on the wireless network name or SSID. 6. If the network selected requires a WiFi password/key, enter the key under Wireless Security. Note: You can choose to enable MU-MIMO if the router/AP you are connecting to supports this feature. 7. To save changes to this section, click Save when finished.
TEW-827DRU TRENDnet User’s Guide Advanced Settings Advanced > Wireless (2.4GHz or 5GHz) > Advanced These settings are advanced options that can be configured to change advanced wireless broadcast specifications. It is recommended that these settings remain set to their default values unless you are knowledgeable about the effects of changing these values. Changing these settings incorrectly can degrade performance.
TRENDnet User’s Guide TEW-827DRU © Copyright 2018 TRENDnet. All Rights Reserved.
TEW-827DRU TRENDnet User’s Guide Steps to improve wireless connectivity There are a number of factors that can impact the range of wireless devices. Follow these tips to help improve your wireless connectivity: 1. Keep the number of obstructions to a minimum. Each obstruction can reduce the range of a wireless device. Position the wireless devices in a manner that will minimize the amount of obstructions between them. a. b. 4.
TEW-827DRU TRENDnet User’s Guide Advanced Router Settings Manually configure your Internet connection Advanced > Setup > WAN Settings Change your router login password Advanced > Setup > Management 1. Log into your router management page (see “Access your router management page” on page 10). 1. Log into your router management page (see “Access your router management page” on page 10). 2. Click on Advanced and click on Setup, then click on WAN Settings. 2.
TEW-827DRU TRENDnet User’s Guide IPv6 Settings Advanced > Setup > IPv6 Settings IPv6 (Internet Protocol Version 6) is a new protocol that significantly increases the number of available Internet public IP addresses due to the 128-bit IP address structure versus IPv4 32-bit address structure.
TRENDnet User’s Guide TEW-827DRU Clone a MAC address Advanced > Setup > WAN Settings On any home network, each network device has a unique MAC (Media Access Control) address. Some ISPs register the MAC address of the device (usually a router or a computer) connected directly to the modem.
TEW-827DRU TRENDnet User’s Guide Change your router IP address Set up the DHCP server on your router Advanced > Setup > LAN Settings Advanced > Setup > LAN Settings In most cases, you do not need to change your router IP address settings.
TEW-827DRU TRENDnet User’s Guide Secondary DNS Server: Enter a secondary DNS server IP address to issue to DHCP clients. Set up DHCP reservation Advanced > Setup > LAN Settings DHCP (Dynamic Host Configuration Protocol) reservation (also called Static DHCP) allows your router to assign a fixed IP address from the DHCP server IP address range to a specific device on your network.
TEW-827DRU TRENDnet User’s Guide Note: If you would like to discard the changes, click Clear. Click Add - Saves the reservation. Note: Click Clear discards and erases the current information. You will see the new reservation added to the DHCP Reservations Ready Group. This is a temporary list until you save changes by clicking Apply. You can continue to add more DHCP reservation entries which will appear in this list.
TEW-827DRU TRENDnet User’s Guide Enable/disable UPnP on your router Enable/disable Application Layer Gateways (ALG) Advanced > Administrator > Advanced Network Advanced > Firewall > ALG UPnP (Universal Plug and Play) allows devices connected to a network to discover each other and automatically open the connections or services for specific applications (e.g. instant messenger, online gaming applications, etc.
TEW-827DRU TRENDnet User’s Guide Denial of Service (DoS) Allow/deny multicast streaming Advanced > Firewall > DoS Advanced > Wireless (2.4GHz or 5GHz) The router supports prevention against common denial of service attacks. Malicious users use denial of service attacks to temporarily or permanently disrupt the availability of services from a network resource such as your router.
TRENDnet User’s Guide IPv6 Firewall Advanced > Firewall > IPv6 Firewall If you are using IPv6 Internet connectivity with your Internet Service Provider (ISP), you may want to enable IPv6 security on your router to prevent internal access using IPv6 protocol to your internal LAN network.
TEW-827DRU TRENDnet User’s Guide Identify your network on the Internet Advanced > Setup > Management Since most ISPs constantly change your home IP address, providing access to devices on your home or small office Local Area Network (such as IP Cameras) from the Internet requires setting up a Dynamic DNS service and entering the parameters into this management area.
TRENDnet User’s Guide Set your router date and time Advanced > Administrator > Time 1. Log into your router management page (see “Access your router management page” on page 10). 2. Click on Advanced and click on Administrator, then click Time. 3. Review the Time settings. To save changes to this section, click Apply when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the lefthand menu, and click Apply & Reboot.
TRENDnet User’s Guide Create schedules Advanced > Setup > Schedule TEW-827DRU 3. Review the Schedule settings. To save changes to this section, click Add when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply & Reboot. For additional security control, your router allows you to create schedules to specify a time period when a feature on your router should be activated and deactivated.
TEW-827DRU TRENDnet User’s Guide Access Control (IP Protocol Filter) Advanced > Security > Access Control You may want to block computers or devices on your network access to specific ports (used or required by a specific application) to the Internet. Client IP Address Range – Enter the IP address or IP address range to apply the protocol/IP filter. (e.g. 192.168.10.20-192.168.10.20 or 192.168.10.20192.168.10.30). Note: The filter will not be applied to IP addresses outside of the range specified.
TEW-827DRU TRENDnet User’s Guide Block all services Inbound Filter 1. Log into your router management page (see “Access your router management page” on page 10). Advanced > Security > Inbound Filter 2. Click on Advanced and click on Security, then click on Access Control. Note: You can apply a predefined inbound filter to the following features: 3. Next to Enable Access Control, click the Enable option. Inbound Filters allows you to allow or deny a specific range of IP addresses.
TEW-827DRU TRENDnet User’s Guide Open a device on your network to the Internet Virtual Server This router can provide access to devices on your local area network to the Internet using the Virtual Server, Special Application, method (DMZ NOT recommended). Advanced > Firewall > Virtual Server DMZ Advanced > Firewall > DMZ You may want to expose a specific computer or device on your network to the Internet to allow anyone to access it.
TEW-827DRU TRENDnet User’s Guide Note: The Public Port can be assigned a different port number than the Private Port (also known as port redirection), however it is recommended to use the same port number for both settings. Please refer to the device documentation to determine which ports and protocols are required. It is recommended to assign a static IP address to the device or use DHCP reservation to ensure the IP address of the device does not change.
TEW-827DRU TRENDnet User’s Guide Special Applications Advanced > Firewall > Special Applications Application rules (also called port triggering) is typically used for online gaming applications or communication applications that require a range of ports or several ports to be dynamically opened on request to a device on your network.
TEW-827DRU TRENDnet User’s Guide Gaming Advanced > Firewall > Gaming Gaming allows you to define multiple ports (used or required by a specific application or game) and forward them to a single IP address (a computer or device) on your network. Using this feature is more secure compared to using DMZ (see “DMZ” on page 45) in which DMZ forwards all ports instead of only specific ports used by an application.
TEW-827DRU TRENDnet User’s Guide Allow remote access to your router management page Add static routes Advanced > Setup > Management Advanced > Setup > Routing You may want to make changes to your router from a remote location such at your office or another location while away from your home. You may want set up your router to route computers or devices on your network to other local networks through other routers.
TEW-827DRU TRENDnet User’s Guide Note: Configuring this feature assumes that you have some general networking knowledge. 1. Log into your router management page (see “Access your router management page” on page 10). 2. Click on Advanced and click on Setup, then click on Routing. 3. Review the Routing section. To save changes to this section, click Save when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the lefthand menu, and click Apply & Reboot.
TEW-827DRU TRENDnet User’s Guide Using External USB Storage Your router’s USB port can be used to share files through the network when a USB storage device is connected on the back USB port. The router supports both FTP and SAMBA (SMB) filing sharing protocols. Note: For security purposes, the USB SMB and FTP settings on your router are disabled by default. You will need to enable these settings in orders to allow access to your USB storage devices.
TRENDnet User’s Guide Samba (SMB) Server: Select enable or disable for the feature. Server Name: You can change the name of your server which will be the name you will when accessing your USB storage device. (Note: You can also access the USB storage using the router IP address) Workgroup: Enter the workgroup name. It is recommended to keep the standard default “WORKGROUP”.
TRENDnet User’s Guide FTP (File Transfer Protocol) Server Advanced > USB > FTP FTP (File Transfer Protocol) is used to access shared files through the Internet. In order to share files, you will need to plug in a USB storage device on the USB port on the back of the router. TEW-827DRU File Server Codepage: Defines which character set to use when transferring data using FTP. It is recommended to leave these settings as default “Western European”. 4. Review the User Account List section.
TRENDnet User’s Guide BitTorrent Client Settings Advanced > USB > BitTorrent The router has an integrated BitTorrent client that can be used for downloading torrents directly to the external USB storage device connected to one of the router's USB ports. You can set parameters such as the maximum upload/download speeds, peer number, and connection port. 1. Log into your router management page (see “Access your router management page” on page 10). 2.
TEW-827DRU TRENDnet User’s Guide Virtual Private Networking (VPN) A. Router Configuration Advanced > Setup > VPN Creating a Virtual Private Network What is a VPN? A VPN provides secure communications typically over the Internet by creating a secure tunnel between two or more VPN routers (gateways) also known as a site-to-site VPN or between a single client computer and a VPN router (gateway) also known as a clientserver VPN.
TEW-827DRU TRENDnet User’s Guide Port: A different port number may be entered however, 1194 is the default port used with the OpenVPN client software. Protocol: TCP or UDP may be selected however, UDP is the default protocol used with the OpenVPN client software. IP / Subnet Mask: The IP address subnet specifies the IP address range assigned to VPN client devices up establishing connectivity.
TEW-827DRU TRENDnet User’s Guide 4. If prompted to run the file, click Run. 5. At the installation window, click Next. 6. At the license agreement window, review the license agreement and click I Agree. 7. At the choose components window, click Next. © Copyright 2018 TRENDnet. All Rights Reserved.
TEW-827DRU TRENDnet User’s Guide 8. At the install location window, click Install. 10. At the installation completion window, click Next. 9. At the prompt to install the TAP-Windows adapter, click Install. 11. Make sure to uncheck the “Show Readme” and “Start OpenVPN GUI” options and click Finish. © Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-827DRU 13. Double-click on the OpenVPN GUI shortcut on your desktop to start the OpenVPN Client software. 14. The OpenVPN system tray icon will appear in the bottom right corner. Right-click the icon to display the configuration menu. 12. Copy the client configuration file(s) (client.ovpn) downloaded from the router to the following path without any sub-folders. C:\Program Files\OpenVPN\config © Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TEW-827DRU 15. After right-clicking the icon, the menu will appear. Click Connect to establish your VPN connection to your router. 16. If the VPN connection is successful, you will receive the notification below in the bottom right corner. You will be able to access resources securely from your router LAN network over the Internet such as shared folders, media, files, etc. Note: To disconnect your VPN client connection, right click OpenVPN system tray icon and select Disconnect.
TEW-827DRU TRENDnet User’s Guide Router Maintenance & Monitoring Router Default Settings Reset your router to factory defaults Administrator User Name admin Advanced > Administrator > Settings Management Administrator Password You may want to reset your router to factory defaults if you are encountering difficulties with your router and have attempted all other troubleshooting.
TEW-827DRU TRENDnet User’s Guide Backup and restore your router configuration settings Reboot your router Advanced > Administrator > Settings Management Advanced > Administrator > Settings Management You may have added many customized settings to your router and in the case that you need to reset your router to default, all your customized settings would be lost and would require you to manually reconfigure all of your router settings instead of simply restoring from a backed up router configuration fi
TRENDnet User’s Guide Upgrade your router firmware Advanced > Setup > Firmware TRENDnet may periodically release firmware upgrades that may add features or fix problems associated with your TRENDnet router model and version. To check if there is a firmware upgrade available for your device, please check your TRENDnet model and version using the link. http://www.trendnet.
TEW-827DRU TRENDnet User’s Guide Manual Firmware Upgrade 1. If a firmware upgrade is available, check the router model on our website http://www.trendnet.com/support and download the firmware to your computer. 1. Log into your router management page (see “Access your router management page” on page 10). 2. Click on Advanced and click Setup, then click Firmware. 2. Unzip the file to a folder on your computer. Please note the following: Do not interrupt the firmware upgrade process.
TEW-827DRU TRENDnet User’s Guide Allow/deny ping requests to your router from the Internet How to capture network packets Advanced > Administrator > Advanced Network Advanced > Administrator > Advanced Network To provide additional security, you may want to disable your router from responding to ping or ICMP (Internet Control Message Protocol) requests from the Internet. A ping is network communication test to check if a device with IP address is alive or exists on the network.
TEW-827DRU TRENDnet User’s Guide Diagnostic Tools Ping Watchdog Advanced > Administrator > Diagnostics Advanced > Setup > Ping Watchdog The router also provides additional tools for network troubleshooting such as ping test, traceroute, nslookup, and netstat. The ping watchdog feature allows the router automatically reboot when communication (ping) connectivity is lost to a specific device IP address.
TEW-827DRU TRENDnet User’s Guide Auto Reboot Wireless Client List Advanced > Setup > Auto Reboot Advanced > Administrator > Client Status The scheduled automatic reboot feature allows you to set a daily or weekly schedule for the router to initiate an automatic reboot in an attempt to resolve any connectivity issues or intermittent problems that may occur with your device. Before using the scheduled automatic reboot feature, please ensure your Time settings are configured correctly.
TEW-827DRU TRENDnet User’s Guide Check the router system information Advanced > Administrator > Status You may want to check the system information of your router such as WAN (Internet) connectivity, wireless and wired network settings, router MAC address, and firmware version. 1. Log into your router management page (see “Access your router management page” on page 10). 2.
TEW-827DRU TRENDnet User’s Guide LAN Information MAC Address – The current MAC address of your router’s wireless or interface configuration. IP Address - Displays your router’s current IP address. Subnet Mask – Displays your router’s current subnet mask. 5GHz Wireless LAN MAC Address: The MAC address of your router’s 5GHz wireless LAN interface configuration. Network Name (SSID) / Security Mode: Displays the current 5GHzprimary wireless network name and security mode assigned to your router.
TEW-827DRU TRENDnet User’s Guide IPv6 Status View your router log Advanced > Administrator > IPv6 Status Advanced > Administrator > System Log You can view the current IPv6 status on your router. Your router log can be used to obtain activity information on the functionality of your router or for troubleshooting purposes. 1. Log into your router management page (see “Access your router management page” on page 10). 1.
TEW-827DRU TRENDnet User’s Guide Router Management Page Structure BASIC Network Status Wireless o 2.
TEW-827DRU TRENDnet User’s Guide Technical Specifications Standards IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3az IEEE 802.11a IEEE 802.11b IEEE 802.11g IEEE 802.11n (up to 800 Mbps @ 256QAM)* IEEE 802.11ac (up to 1733 Mbps)* Hardware Interface 4 x Gigabit LAN ports 1 x Gigabit WAN port 1 x USB 3.
TEW-827DRU TRENDnet User’s Guide 802.11b: CCK, DQPSK, DBPSK 802.11a/g: OFDM with BPSK, QPSK and 16/64-QAM 802.11n: BPSK, QPSK, 16-QAM, 64-QAM with OFDM 802.11ac: OFDM with BPSK, QPSK and 16/64/256-QAM Media Access Protocol CSMA/CA with ACK Antenna Gain 2.4 GHz: 4 x 3 dBi (max.) detachable/external; 5 GHz: 4 x 5 dBi Wireless Output Power (max output power without antenna gain) 802.11a: FCC: 26 dBm (max.) / ETSI: 22 dBm (max.) / IC: 26 dBm (max.) 802.11b: FCC: 27 dBm (max.
TRENDnet User’s Guide Troubleshooting Q: I typed http://tew-827dru in my Internet Browser Address Bar, but an error message says “The page cannot be displayed.” How can I access the router management page? Answer: Access the router using the default IP address 192.168.10.1. http://192.168.10.1 Q: I typed http://192.168.10.1 in my Internet Browser Address Bar, but an error message says “The page cannot be displayed.” How can I access the router management page? Answer: 1. Check your hardware settings again.
TEW-827DRU TRENDnet User’s Guide Appendix Note: If you are experiencing difficulties, please contact your computer or operating system manufacturer for assistance.
TEW-827DRU TRENDnet User’s Guide In MAC 10.4, from the Configure IPv4, drop-down list, select Using DHCP and click the Apply Now button. In MAC 10.5, from the Configure drop-down list, select Using DHCP and click the Apply button. In MAC 10.6, from the Configure drop-down list, select Using DHCP and click the Apply button. f. Restart your computer. Note: If you are experiencing difficulties, please contact your computer or operating system manufacturer for assistance.
TEW-827DRU TRENDnet User’s Guide Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
TEW-827DRU TRENDnet User’s Guide Česky [Czech] Dansk [Danish] Deutsch [German] Eesti [Estonian] English Español [Spanish] Ελληνική [Greek] Français [French] Italiano[Italian] TRENDnet tímto prohlašuje, že tento TEW-827DRU je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 2014/35/ES, 2014/30/ES, 2014/53/EU, 2013/35/EU, 2009/125/ES, 2011/65/EU, a 2012/19/EU.
TRENDnet User’s Guide Slovensky [Slovak] Suomi [Finnish] Svenska [Swedish] TEW-827DRU TRENDnettýmtovyhlasuje, že TEW827DRUspĺňazákladnépožiadavky a všetkypríslušnéustanoveniaSmernice 2014/35/ES, 2014/30/ES, 2014/53/EU, 2013/35/EU, 2009/125/ES, 2011/65/EU, a 2012/19/EU. TRENDnet vakuuttaa täten että TEW-827DRU tyyppinen laite on direktiivin 2014/35/EY, 2014/30/EY, 2014/53/EU, 2013/35/EU, 2009/125/EY, 2011/65/EU, ja 2012/19/EU oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
TEW-827DRU TRENDnet User’s Guide Industry Canada Statement This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: Type Manufacture Gain Connector Dipole WHAYU 3 dBi (2.4G) /5dBi (5.0G) R-SMA (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Limited Warranty TRENDnet User’s Guide Limited Warranty TRENDnet warrants only to the original purchaser of this product from a TRENDnet In the event that, after evaluation, TRENDnet cannot replace the defective product or there is no comparable model available, we will refund the depreciated value of the product. authorized reseller or distributor that this product will be free from defects in material and workmanship under normal use and service.
Limited Warranty TRENDnet User’s Guide shipping from outside of the USA and Canada are responsible for any return shipping LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW, TRENDNET ALSO and/or customs charges, including but not limited to, duty, tax, and other fees.
