User Guide
Table Of Contents
- Product Overview
- Router Installation
- Basic Router Settings
- Access your router management page
- Saving and applying router configuration changes
- Change your administrator password
- Set your router date and time
- Create time schedules
- Change LAN IPv4 address settings
- Configure LAN IPv4 DHCP server settings
- Add static DHCP reservations
- Add static host name entries
- Configure WAN1 / WAN2 interfaces for Internet connectivity
- IPv6 settings
- Virtual LANs (VLANs)
- Application layer gateway (ALG)
- Universal plug and play (UPnP)
- Static routes
- Dynamic routing protocols
- Quality of Service (QoS)
- Dynamic DNS
- File sharing server
- Wake on LAN (WoL)
- Wireless Networking and Security
- Wireless Settings
- How to choose the type of wireless security
- Secure your wireless network
- Guest Network
- Connect wireless devices using WPS
- Steps to improve wireless connectivity
- General settings
- Port forwarding rules
- Port trigger rules
- IP filtering
- MAC filtering
- Denial of service (DoS) prevention
- DMZ Host
- One-to-One NAT
- RADIUS Authentication
- Multiple WAN Management Settings
- Setup your router with Router Limits
- Router Limits Content Management
- Creating a Virtual Private Network (VPN)
- PPTP VPN Server
- L2TP VPN Server
- IPsec (Internet Protocol Security)
- Secure Socket Layer VPN (SSL) / OpenVPN
- Certificate Management
- Managing access to the router management interface
- Diagnostic tools
- Backup and restore your router configuration settings
- Reboot your router
- Scheduled automatic reboot
- Console access
- Router Default Settings
- Reset your router to factory defaults
- Upgrade your router firmware
- Check the router status information
- View routing table and ARP entries
- View your router logging
- Technical Specifications
- Appendix
© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-829DRU
55
5. At the welcome page, enter your email address to use for account creation and sign
up and click Submit. Follow the remaining steps to create your Router Limits account.
6. At the pair hardware page, the pairing code displayed should match the pairing code
displayed in your router management page. If the pairing code does not match, you can
click Auto Detect to automatically copy the router pairing code into the field or you can
manually enter the correct pairing code. After you have verified the correct pairing code
is entered, click Pair.
7. After your Router Limits account has been created and your router paired, you will
automatically be brought to your web management dashboard. The Current Status on
your router will display Online that the content management service is running and
paired with your online account.