User's Guide
Table Of Contents
- Contents
- Product Overview
- Primary Product Application
- Minimum Installation Requirements
- Wireless Installation Tips
- Model Differences
- TEW-840APBO Setup & Installation
- TEW-840APBO2K Setup and Installation
- Channel Access Method
- Application Modes
- Accessing your access point management page
- Overview
- Network
- Management
- System Manager
- Technical Specifications
- Appendix
© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-840APBO / TEW-840APBO2K
35
Wireless Settings – 5GHz
Note: The following section will have different options bases on chosen Channel Access
Mode and Operation Mode of the access point. Not all menu options will apply.
For Access Point and WDS Access Point modes:
Enabled – Check the box to enable this wireless radio. Deselected box indicates
radio is off.
SSID – The SSID of the radio.
Edit – To edit the SSID settings, click Edit. **if the pop-up window does not
appear, please disable the browser’s ad/pop-up blocker**
Security – Displays the security type assigned to this SSID.
Hidden SSID – Check the box to hide this SSID name from broadcasting.
Client Isolation – Check the box to block communication between associated
clients under the same WLAN.
VLAN Isolation – When this option is selected with a specified VLAN ID in the
SSID profile, all traffic associated with this SSID will be tagged with this VLAN ID
upon entering the LAN Bridge.
L2 Isolation – Check the box to isolate on a layer-2 basis.
Note: CSMA Access Point mode can have 8 radios, CSMA WDS Access Point can have 4,
TDMA AP and WDS AP only can have 1.
Management Interface (TDMA AP and WDS AP Only)
This interface is for wireless clients to wireless connect to and manage the AP
when the AP is set to TDMA. A secondary wireless radio is required in order for
standard 802.11 wireless devices to connect to it.
Clicking Edit from above, Wireless Settings.
Security Mode – Select the mode from the dropdown menu.
Encryption – Select the mode from the dropdown menu.
Passphrase – Enter the Wi-Fi passphrase in this field.
Group Key Update Interval – Enter the time between group key updates.
Fast Roaming (access point mode only) – Check Enable to enable fast roaming.
Wireless MAC Filter – Select from the ACL dropdown to allow or deny, and
ender in the MAC Address.
Wireless Traffic Shaping – Select Enable to enable this feature. Enter in the
desired limits and then press save.