Quick Installation Guide AP Management
Table of Content English 1. Installation 2. Setup Minimum System Requirement Ÿ Web browser (Mozilla Firefox, Google Chrome or Internet Explorer 9 and above).
1. Installation 1. Double click on the AP Management main project Install file. Ap_mgmt_setup.prj.exe 2. Launch the Xampp Control Panel. 3. Start the Apache/MySQL servers by clicking on the Start button to the right. 4. Open the Apache default port by opening a web browser and navigating to http://127.0.0.1:8008/ap_mgmt/ 5.
2. Setup 1. Click on the “Device Discovery” tab at the top. 2. Select the device(s) you want to add and enter the default username and password. Username: admin Password: admin 3. Press “Manage” to Manage selected access points or click “Manage” to the right of each access point. Note: To manage ALL access points, click “Manage All.” 4. Click on the “Batch Setup” tab at the top of the page. From here, you can manage your access points and customize any necessary settings.
AP Management Technical Support If you have any questions regarding the product installation, please contact our Technical Support. Toll free US/Canada: 1-866-845-3673 Regional phone numbers available at www.trendnet.com/support Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at: http://www.trendnet.
