Quick Installation Guide TEW-P21G
Table ofofContents Table Contents English ...................................................................................................... 1. Before You Start ................................................................................. 2. How to Connect ................................................................................. 3. Using the Print Server ........................................................................ 1 1 2 3 Troubleshooting ........................................
1. Before You Start Package Content TEW-P21G Quick Installation Guide Driver CD-ROM Power Adapter (5V, 2.5A) System Requirements 1. Pentium 100Mhz or faster processor 2. 8MB RAM or more 3. Windows, Linux, Mac OS X or other OS 54Mbps 802.11g Wireless Multi-Port Print Server (TEW-P21G) Parallel Printer USB 2.0 Printers Workstation with Wireless PCI Adapter (TEW-423PI) Internet Notebook with Wireless PC Card (TEW-421PC) Cable/DSL 802.
2. How to Connect Note: Please power off all printers before connecting them to the print server. Then turn on each printer after you make your hardware connections. 1. Connect the antenna. 2. Connect a Parallel or USB printer to the printer ports. 3. Connect the RJ45 cable to the LAN port and to your network hub or switch. 4. Plug the AC power adapter into the Print Server.
3. Using the Print Server Note: For MAC Users, change your computer’s IP address to 192.168.0.X (where X is an available number from 2-254), and enter 192.168.0.1 in your web browser to access the Print Server's Web Utility. For Windows Users 1. After inserting the installation CD, click Install Utility. 2. Go through each installation step and click Finish. 3. Double-click the PS-Utility icon. PS-Utility V3.
4. Click Change IP Address. 5. Select Manually Assign and type in an IP Address that matches your current network segment. Click OK. Another pop-up window will appear to confirm the change. Click OK. 6. Click Show Web Setup on PSUtility. Take note and write down the Server Name and the Printer Name.
Note: If you are using Windows 95/98(SE)/ME, then make sure that NETBEUI is installed before you follow the instructions below. If you are using Windows 2000/XP, then you can simply add your printer using the instructions below. For TCP/IP Printing instructions, please consult the User's Guide on the CD-ROM for details. 7. Go into Control Panel and doubleclick Printers and Faxes. Click Add Printer. 8. Click Next on the Add Printer Wizard, and select the network printer option. Click Next.
9. Select Connect to this printer and type in the server name and the printer name in the following format: \\server_name\printer_name Click Next. 10. Click OK. 11. Select the appropriate driver for your printer and click Next. 12. Select Yes and click Next. Click Finish to complete the installation. Your installation is now complete. Note: For more detail on advanced features, please consult the User's Guide.
Troubleshooting Q1. I cannot add a network printer after I typed the server name and printer name. A1. Please double check your hardware connections. Make sure that your printer is connected properly to the print server and your power adapter is connected properly to a power outlet. Q2. I have double checked my hardware connections and have verified that everything is connected properly, but I still cannot connect to my printer after I typed in the server name and printer name. A2.
Q7. I pressed the reset button and held it for 15 seconds. I also typed in http://192.168.0.1 in a web browser, but I still cannot access my print server. A7. Make sure to change your IP Address to 192.168.0.xxx where xxx is an available number between 2 to 254. Q8. I configured my Wireless Print Server to have the same SSID as my Access Point, but I still cannot print from my Wireless Print Server. A8. Your Access Point or Wireless Router may have enabled its wireless security.
TRENDnet Technical Support US/Canada Support Center European Support Center Contact Contact Telephone: 1(866) 845-3673 Email: support@trendnet.
