User's Manual

11
Security
This function is used to protect wireless communication from eavesdropping. A
secondary function of encryption is to prevent unauthorized access to a wireless
network, and it can be achieved by using the Encryption function.
This AP provides three modes for Security Encryption, WPA, 802.1x and WEP.
When there are security function enable, it will show check sign or numbers on the
left side of the screen.
 Check sign means that the function is enable.
 The numbers shows that how many Radius servers were set.
I. Access Control List
Access Control function allows clients whose MAC addresses in the list will be
able to connect to this Access Point. When this function is activate, there is no
wireless clients will be able to connect to the Access Point unless they are listed in
the Access Control list.
 Default Access: select the Accept will allows the clients on the list to connect to
this AP, and select Reject to disable the clients on the list to connect to the AP.
 Specific Clients: add the MAC address list of the clients that the manager want
to control, the manager can control the specific clients in the list to enable or
disable accessing with the AP.