User Manual Part 1

30
VPI: Virtual Path Identifier. Enter the VPI value provided by ISP.
VCI: Virtual Channel Identifier. Ethernet the VCI value provided by ISP.
Encapsulation: Select the encapsulation type LLC or VC-Mux produced by your
ISP.
Channel Mode: Select the channel mode for 1483 Bridged, 1483 MER, PPPoE,
PPPoA, 1483 Routed or 1577 Routed provide by ISP.
Enable NAPT: Checked to enable the NAPT function on the WLAN ADSL Router.
Admin Status: Enable or disable the ATM VC setting when adding to the ATM
VC Table.
PPP Settings: When the channel mode selected by PPPoE or PPPoA.
User Name: Enter the user name provide by ISP.
Password: Enter the user name provide by ISP.
Type: Select the connection type for “Continuous”, “Connect on Daemon” or
“Manual” connect.