User Manual Part 1

35
SSID TYPE: The WLAN ADSL Router supports up to four multiple SSID
feature (Multiple Virtual AP), select which AP (Root AP, VAP0~VAP3) will
setting the WEP key.
Key Length: Select the level of encryption from the drop-down list 64 and 128-
bit encryption.
Key Format: Select the key format from the drop-down list HEX or ASCII.
Default TX Key: Select which encryption key 1~4 will be use to default TX
key.
Encryption Key 1 ~ 4: Enables users to create up to 4 different WEP keys,
manually enter a set of values for each key.
WPA Authentication Mode: There are 2 types of authentication mode for
WPA.
Enterprise (RADIUS): WPA RADIUS uses an external RADIUS server to
perform user authentication. To use WPA RADIUS, enter the IP address of the
RADIUS server, the RADIUS port (default is 1812) and the shared secret from
the RADIUS server. Please refer to “Authentication RADIUS Server” setting
below for RADIUS setting.
Personal (Pre-Shared Key): Pre-Shared Key authentication is based on a
shared secret that is known only by the parties involved. To use WPA Pre-
Shared Key, select key format and enter a password in the “Pre-Shared Key
Format” and “Pre-Shared Key” setting respectively. Please refer to “Pre-
Shared Key Format” and “Pre-Shared Key” setting below.
Pre-Shared Key Format:
Passphrase: Select this to enter the Pre-Shared Key secret as user-friendly
textual secret.
Hex (64 characters): Select this to enter the Pre-Shared Key secret as
hexadecimal secret.