User's Manual

Preamble: Select Long or Short Preamble type. Preamble is a sequence of bits

transmitted at 1Mbps that allows the PHY circuitry to reach steady-state

demodulation and synchronization of bit clock and frame start. Two different

preambles and headers are defined: the mandatory supported Long Preamble and

header, which interoperate with the 1 Mbit/s and 2 Mbit/s DSSS specification (as

described in IEEE Std 802.11), and an optional Short Preamble and header (as

described in IEEE Std 802.11b). At the receiver, the Preamble and header are

processed to aid in demodulation and delivery of the PSDU. The Short Preamble

and header may be used to minimize overhead and, thus, maximize the network

data throughput. However, the Short Preamble is supported only from the IEEE

802.11b (High- Rate) standard and not from the original IEEE 802.11. That means

that stations using Short-Preamble cannot communicate with stations implementing

the original version of the protocol. Click “Apply” for the changes to take effect.

Support Band: There are three functions for users select, including 11B, 11G and

eXtended Range. The default setting is 11B, 11G and eXtended Range enable,

which is interoperable with both 11B and 11G devices, and provide more than

500m connection ability.

Note: user must select one of 11B or 11G at least, otherwise the wireless

connection will not function.

III. Advanced

This is the page to configure Security settings of 108Mbps wireless LAN PC card.

Encryption: 4 options are available: Disable, Enable, WPA and WPA-PSK.

Select Enable or Disable for WEP data encryption feature. If one of the two