User Guide

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-648UB
2
Product Hardware Features
LED
LED Status
Description
Slow Blink
(1 blink/second)
When the LED is blinking, the wireless adapter is
transmitting or receiving data.
Fast Blink
(3 blinks/second)
After pressing the WPS button, the LED will flash 3 blinks /
second. Once the connection is successfully established
between the AP and the adapter, the LED will remain solid
for 5 seconds to tell the users that the connection has been
established. After 5 seconds, the LED will turn off to indicate
that the AP is ready for a new WPS connection and the
adapter is associated with the AP.
Off
User inserts the card into the NB without driver installed,
and without connection.
WPS Button
Press the WPS button start the WPS pairing, the LED will begins to blinking for 3
blinks/second, once the connection is successfully established between the AP and the
adapter, the LED will remain in solid for 5 seconds to tell the users that the connection
has been established. After 5 second, the LED will light off to indicate user that the
Access Point or Wireless Router is ready for a new WPS connection and the adapter is
associated with the Access Point or Wireless Router.