User's Manual Part 2

22
EnteraPINintomyaccesspoint
UsingtheWPSconfigurationwiththe“EnteraPINintomyaccesspoint”method,
theconfigurationstepsasbelow:

1) Selectedthe“EnteraPINintomyaccesspoint”,thePINwillbeshowonthe
buttonofthewindows.



2) EnterthePINcodeintotheWPS“ClintPINnumber”ofyouwirelessaccess
pointorrouterthenclicktheStartPINbutton,thewirelessaccesspointor
routerwillstarttheWPSconfigurationprocess.

3) Selected a wireless access point or router which one will be connecting
then
click the Next button start the WPS configuration. If the “Automatically select
thenetwork”waschecked,thesetupstepwillbeskip.