User Manual

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-652BRU
17
Basic wireless settings
Wireless > Basic
You can change the basic wireless network settings on your router such as the SSID (also
called wireless network name), 802.11 mode, channel, and channel width.
1. Log into your router management page (see “Access your router management page”
on page 26).
2. Click on Wireless, and click on Basic.
3. Please review the additional wireless settings to configure and click Apply to save the
changes.
• Wireless –Enabled turns on the wireless networking on your router and
Disabled turns off wireless networking on your router.
Note: It is recommended to leave the wireless setting to Enabled unless you do not
plan on connecting any wireless computers or devices to your network.
• SSID – The name of your wireless network. Identifies your wireless network
when connecting with wireless devices. Enter the wireless network name.
• Auto Channel – Check the option to allow your router to automatically select
the best channel for wireless communication.
• Channel – To manually set the channel, uncheck Auto Channel, then click the
drop-down list and select the channel for wireless communication.
• 802.11 Mode - Select the appropriate mode for your network.
o 2.4GHz 802.11b/g/n mixed mode – Select this mode for the best
compatibility. This mode allows 802.11b, 11g, and 11n wireless
devices to connect your wireless network.
o 2.4GHz 802.11b/g mixed mode – This mode allows wireless devices to
connect to your wireless network at only 802.11b and 802.11g.
o 2.4GHz 802.11n only mode – This mode allows wireless devices to
connect to your wireless network at only 802.11n.
o 2.4GHz 802.11g only mode – This mode allows wireless to connect to
your wireless network at only 802.11g.
o 2.4GHz 802.11b only mode – This mode allows wireless devices to
connect your wireless network only at 802.11b.