Manualshelf

User Manual Part 1

ManualsBrandsTRENDNET ManualsElectronics802.11n Draft 2.0 Three Mode Wireless Pocket AP
12345678910
Wireless Travel Router10 Wireless Travel Router10
1. PRODUCT OVERVIEW
Note:
Make sure to unplug the power source from the power port rst before switching modes.
AP RT
Client
Mode Switch
Adjust the switch to change
modes:
AP
Client
Router
1 Unplug the power source (power adapter or USB cable) if it is connected.
2 Adjust the switch to desired mode.
3 Re-connect the power source to the power port.
1.4.1 Switching Modes
Use the mode switch at the bottom of the travel router to change modes.
Router Mode
Use this mode to connect the travel router to a DSL or cable modem. With this
mode, wireless clients connect to the Internet through the travel router using one
account and one IP address.
•