User Manual Part 1
Wireless Travel Router18 Wireless Travel Router18
2. AP MODE
2.2.2 Setup
The Setup menu allows you to congure basic router settings. Click the Setup button
then the submenu to view page.
Wireless Network Settings
Enable Wireless
Check the box to enable
wireless function. Uncheck to
disable it.
Wireless Network Name
The name of your wireless
network, also called Service Set
Identier (SSID).
Enter up to 32 characters.
Enable Auto Channel Scan
Auto channel scan selects the
channel with the least amount of
interference. Check to enable auto channel scan.
Wireless Channel
Manually select the channel from the list. By default, the channel is set to 6. If Enable
Auto Channel Scan is checked, this box is grayed out.
802.11 Mode
Limit the type of wireless clients to allow connection with. Select any of the following
modes if your clients are:
2.4Ghz 802.11b/g mixed mode: a mix of 802.11b and 11g wireless devices.
2.4Ghz 802.11b/g/n mixed mode: a mix of 802.11b, 11g, 11n wireless devices.
2.4Ghz 802.11n only mode: all 802.11n wireless devices.
Channel Width
Select the appropriate channel width:
20 MHz (Default): Select if your wireless clients are not 802.11n.
Auto 20/40 MHz: Select if your wireless clients are a mix of 802.11b, 11g, 11n
wireless clients. If you are not sure which wireless clients you are using, select
Auto.
Enable Hidden Wireless
Check to hide the SSID of your wireless network to be broadcasted when wireless
clients scan for wireless networks. To display the router’s SSID, keep the box
unchecked (default).
WMM Enable
Wi-Fi Multimedia (WMM) improves the quality of video and voice applications
•
•
•
•
•