User Manual Part 1

Wireless Travel Router 19Wireless Travel Router 19
2. AP MODE
transmitted over a wireless network. This function is commonly used with multimedia
applications such as a game console. Check the box to enable WMM.
Wireless Security Mode
Select the security level for your wireless network. Select the wireless security mode
from the list:
Disable Wireless Security: (Default) Select if you do not want to use any wireless
security.
Enable WEP Wireless Security (basic)
Enable WPA Wireless Security (enhanced)
Enable WPA-2 Wireless Security (enhanced)
Enable WPA-Auto Wireless Security (enhanced): Select if you are unsure which
WPA wireless security to use.
The required settings vary depending on the selected mode.
•
•
•
•
•
WEP
WEP (Wired Equivalent Privacy) is the basic encryption method. With WEP
encryption, all wireless clients must enter the same key to connect to the access
point.
Authentication
Select the type of authentication:
Open system: Allows public
access to the travel router via
wireless communications.
Shared Key: Requires users
to enter the same WEP key
to exchange data with other
wireless devices.
Auto: Select Auto if you are
•
•
•
unsure which authentication suits best for your wireless clients.
Key Length
Select the key length or the level of encryption:
64Bit: Select to enter 10 hexadecimal characters with any combination of 0-9 or
A-F
128Bit: Select to enter 26 hexadecimal characters with any combination of 0-9
or A-F
Key Format
Select the key format:
ASCII: Select to enter ASCII characters.
HEX: Select to enter hexadecimal characters.
Default WEP Key
The travel router supports up to 4 sets of WEP keys. Select which WEP Key is
used as the default key from the list.
•
•
•
•