User Manual Part 1

Wireless Travel Router20 Wireless Travel Router20
2. AP MODE
WPA / WPA-2 / WPA-Auto
WPA (Wi-Fi Protected Access) uses high grade encryption and authentication
which is designed to improve WEP encryption. WPA / WPA-2 / WPA-Auto uses a
passphrase to authenticate wireless connections.
Cipher Type
Select the encryption method:
TKIP: Temporal Key Integrity
Protocol.
AES: Advanced Encyption
Standard.
•
•
WEP KEY 1-4
Manually enter a set of WEP key for each box. Select the default WEP key from
the Default WEP Key list.
Auto: Select Auto if you are unsure which method is suitable for your wireless
clients.
PSK/EAP
Select the authentication method:
PSK: Select to use a passphrase for authentication.
•
•
Passphrase
Create a passphrase. The passphrase must be 64 hexadecimal or 8-63
ASCII characters.
Conrm Passphrase
Re-enter passphrase.
EAP: Select to use Extensible Authentication Protocol (EAP). This should only
be used when a Radius server is connected to the travel router. You can have
up to 2 Radius server settings.
•
IP
Enter the IP address of the
Radius server.
Port
Enter the port number of the
Radius server. The default
value is 1812.
Shared Secret
Enter the secret key shared
between the travel router and
the Radius server.
Once conguration is complete, click Apply to save and apply settings, or click
Cancel to cancel changes. The travel router will restart for new settings to take effect.