User Manual Part 1
Wireless Travel Router 23Wireless Travel Router 23
2. AP MODE
2.2.3 Advanced
The Advanced menu congurations greatly affect the operating performance of the
travel router. This menu is intended for advanced users. It is recommended to retain
the default settings. Do not change any of congurations if you are unsure about it.
Advanced Wireless Network Settings
Beacon Period
Enter the interval period of time
for the access point to send
out beacons to synchronize the
wireless network. The default
value is 100 milliseconds.
RTS Threshold
The default and the
recommended value is
2346. Should you encounter
inconsistent data ow, only
minor adjustments should be
made.
Fragmentation Threshold
Fragmentation threshold refers to the amount of packets that will be fragmented
before transmission. The default and recommended value is 2346 bytes.
DTIM Interval
This value indicates the interval of Delivery Trafc Indication Message (DTIM).
A DTIM is a countdown eld informing clients of the next window for listening to
broadcast and multicast messages. The default value is 1.
Preamble Type
Preamble is use to limit the packets of data for transmission. When the connection is
bad, it is recommended to use the Short Preamble.
Enable IGMP Snooping
Check the box to enable Internet Group Management Protocol (IGMP) snooping.
This function restrains multicast trafc in a switched network.
Once conguration is complete, click Apply to save and apply settings, or click
Cancel to cancel changes. The travel router will restart for new settings to take effect.