User Manual Part 1

Wireless Travel Router30 Wireless Travel Router30
3. CLIENT MODE
3.1.2 Ad-Hoc Mode
Ad-Hoc is a client setting that provides independent peer-to-peer connectivity in a
wireless LAN. With this mode, devices communicate directly with each other. A good
example is the communication between two game consoles. See diagram below.
1 Adjust the switch to Client mode.
2 Connect one end of the RJ-45 cable to the travel router and the other end to
the game console or other devices.
3 Connect the power adapter to the travel router and plug to an outlet or power
strip. Wait for the travel router to boot.
Network Diagram
Game Console
Game Console
The following LED
indicators should be lit...
Power LED (solid)
LAN LED (solid)
WLAN LED (ashing green)
√
√
√