User Manual Part 1

Wireless Travel Router34 Wireless Travel Router34
3. CLIENT MODE
3.2.2 Setup
The Setup menu allows you to congure basic router settings. Click the Setup button
then the submenu to view page.
Wireless AP/ AP Client Settings
Enable Access Point
Click this button to access
Wireless Network Settings page.
See page 36.
Site Survey
Click this button to scan for
available networks. Available
networks are listed on the table.
To select a network, click on the
network’s radio button.
Wireless Network Name
Displays the name of the
selected wireless network, also
called Service Set Identier (SSID).
Wireless Channel
Displays the wireless channel of the selected network.
Wireless Security Mode
Displays the security mode of the selected network.
Disable Wireless Security: No wireless security is set.
Enable WEP Wireless Security (basic)
Enable WPA Wireless Security (enhanced)
Enable WPA-2 Wireless Security (enhanced)
The required settings vary depending on the wireless security mode.
•
•
•
•
WEP
WEP (Wired Equivalent Privacy) is the basic encryption method. With WEP
encryption, all wireless clients must enter the same key to connect to the access
point.
Authentication
Select the type of authentication:
Open system: Allows public
access to the travel router via
wireless communications.
Shared Key: Requires users
to enter the same WEP key
to exchange data with other
wireless devices.
•
•