TRENDnet User’s Guide Cover Page
TRENDnet User’s Guide Table of Contents Contents Product Overview ...........................................................................1 Package Contents .......................................................................................................... 1 Features ......................................................................................................................... 1 Product Hardware Features...................................................................................
TEW-664UB TRENDnet User’s Guide Product Overview Features The N300 Wireless Dual Band USB Adapter, model TEW-664UB, connects a laptop or desktop computer to an high performance 300Mbps dual band wireless network. Quickly connect to a 2.4GHz or 5GHz wireless network at the touch of a button with the convenience of the one-touch Wi-Fi Protected Setup (WPS) button. Seamlessly stream HD video over the less congested 5GHz band. Advanced wireless encryption protects your digital network.
TEW-664UB TRENDnet User’s Guide Product Hardware Features Application Diagram LED/WPS button • Power/Status LED -This LED turns on when the USB adapter has power and ready for use and blinks during wireless data transmission. • WPS (Wi-Fi Protected Setup) button – Push and hold this button for 3 seconds to activate WPS. The Power/Status LED will blink blue when WPS is activated.
TEW-664UB TRENDnet User’s Guide Installation Hardware Installation Software Installation 1. Plug the N300 Wireless Dual Band USB Adapter into an available USB slot on your computer. This section describes how to install the driver and utility for the N300 Wireless Dual Band USB Adapter. 1. Insert the Utility and Driver CD-ROM into your computer’s CD-ROM Drive and then click Install Utility. 2. Verify that the LED is turned on. Continue to the next section on how to configure that wireless adapter.
TEW-664UB TRENDnet User’s Guide Wireless Utility Wireless Utility Setting The user can configure the wireless settings using the Wireless Adapter Configuration Utility. Double-click the utility icon that appears in the taskbar. The Wireless Adapter Configuration Utility is divided into six sections: General, Profile, Available Networks, Status, Statistics and WPS. General This screen shows the general information of the wireless adapter. • Status: Shows connection status.
TEW-664UB TRENDnet User’s Guide • Add: Adds a profile. The following screen will appear. The user can enter the necessary information required for accessing the particular Access Point or Wireless Router. Or you can search the desire wireless router or AP under Available Networks section and click on Add Profile button to add the Profile. • Remove: Deletes the selected profile • Edit: Edit an exist profile. The screen will back to profile.
TEW-664UB TRENDnet User’s Guide Available Networks Status This screen allows the user to scan for available wireless network. It also allows the user to establish wireless communications with a target device.
TEW-664UB TRENDnet User’s Guide • Authentication: The authentication type used on the wireless adapter. This information is useful to determine if the applied wireless authentication is the same as your wireless network. • Region: The wireless adapter’s wireless region. • MAC Address: The MAC address of the wireless adapter. This information is useful to determine your wireless adapter when looking at the DHCP server list of your wireless adapter.
TEW-664UB TRENDnet User’s Guide WiFi Protected Setup (WPS) Wi-Fi Protected Setup (WPS) is an optional certification program from the Wi-Fi Alliance that is designed to ease the task of setting up and configuring security on a wireless network. There are two methods used in the WPS as below instruction. 2.
TEW-664UB TRENDnet User’s Guide 4. Select a wireless access point or router then click the Select button start the WPS configuration. 7. If the WPS configuration was failed, the follow window will show on. Try to repeat the steps again if this screen appears. Push Button Configuration (PBC) 5. 6. The wireless utility will automatically attempt to authenticate to your wireless network. There are 2 ways to run WPS Push Button Configuration.
TEW-664UB TRENDnet User’s Guide 3. If the WPS configuration was successful, the follow window will show on. About This screen displays information about the 300Mbps Dual Band Wireless N USB Adapter, such as the Driver and Utility version. When a new version of the utility becomes available for upgrade, users will be able to identify by version numbers. 4. If the WPS configuration was failed, the follow window will show on.
TEW-664UB TRENDnet User’s Guide Technical Specifications Hardware Frequency 802.11b/g/n: 2.412 ~ 2.484 GHz 802.11a/n: 5.150 ~ 5.250 / 5.725 ~ 5.825 GHz Media Access Protocol CSMA/CA with ACK Data Rate 802.11a: up to 54Mbps (auto fallback) 802.11b: up to 11Mbps Interface USB 2.0, 1.1 standard Standards IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, and IEEE 802.
TRENDnet User’s Guide Troubleshooting Q: I inserted the Utility & Driver CD-ROM into my computer's CD-ROM Drive and the installation menu does not appear automatically. What should I do? Answer: 1. For Windows 7, if the installation menu does not appear automatically, click on the Windows Icon on the bottom left hand corner of the screen,, click the “Search programs and files” box, and type D:\autorun.exe, where “D” in “D:\autorun.
TEW-664UB TRENDnet User’s Guide Appendix upgrades) to support this encryption standard. Total wireless speeds under How to choose the type of security for your wireless network this encryption type however are limited to 54Mbps. Setting up wireless security is very important. Leaving your wireless network open and unsecure could expose your entire network and personal files to outsiders. TRENDnet recommends reading through this entire section and setting up wireless security on your new router.
TEW-664UB TRENDnet User’s Guide Below is brief comparison chart of the wireless security types and the recommended configuration depending on which type you choose for your wireless network. Security Standard Compatible Wireless Standards Highest Performance Under This Setting Encryption Strength Additional Options Recommended Configuration WEP IEEE 802.11a/b/g (802.11n devices will operate at 802.11g to connect using this standard) WPA IEEE 802.11a/b/g (802.11n devices will operate at 802.
TEW-664UB TRENDnet User’s Guide c. From the Location drop-down list, select Automatic. d. Select and view your Ethernet connection. In MAC OS 10.4, from the Show drop-down list, select Built-in Ethernet and select the TCP/IP tab. In MAC OS 10.5/10.6, in the left column, select Ethernet. e. Configure TCP/IP to use DHCP. In MAC 10.4, from the Configure IPv4, drop-down list, select Using DHCP and click the Apply Now button. In MAC 10.
TEW-664UB TRENDnet User’s Guide Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
TEW-664UB TRENDnet User’s Guide EN 301 489-1 V1.8.1 (2008-04) Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements EN 301 489-17 V2.1.
Limited Warranty TRENDnet User’s Guide Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. TEW-664UB – 3 Years Warranty AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty.
