User's Manual

TRENDnet User’s Guide

TEW750DAP

Wireless Network Settings – 5GHz Band

Wireless Band: This displays the wireless band that the AP is used.

Enable Wireless: Tick the check box to enable the wireless feature for the 5GHz

band on this AP. Use the drop-down menu to apply a time schedule to this

wireless network.

Mode: Use the drop-down menu to select the wireless mode. Available options

are AP, WDS, and WDS+AP.

Wireless Network Name: Enter the wireless network name (SSID). This name

will be available when wireless clients scan for available wireless networks.

However, when Visibility Status is set to Invisible, this name will not be visible

to wireless clients.

802.11 Mode: Select which 802.11 wireless modes to use from the drop-down

menu. Options to choose from are 802.11a only, 802.11n only, and Mixed

802.11a and 802.11n. If you are not sure, select Mixed 802.11a and 802.11n.

Enable Auto Channel Scan: Tick the check box to allow the AP to find and use

the wireless channel with the least interference in your environment.

Wireless Channel: Deselect Enable Auto Channel Scan to be able to

configure this. Use the drop-down menu to select a wireless channel.

Transmission Rate: Select the wireless transmission rate. It is advisable to keep

this option on Best (Automatic).

Channel Width: Select the wireless channel width used. Options to choose from

are 20MHz and 20/40MHz (Auto).

Visibility Status: Click Invisible to hide the Wireless SSID and Visible to reveal

it.

WMM Enable: WMM is QoS for your wireless network. This will improve the

quality of video and voice applications for your wireless clients.

Wireless Mode – WDS

When selecting WDS in the Mode drop-down menu, the following section

appears.

Remote AP MAC Address: Enter the MAC address of a remote AP. Click the

radio button to select the corresponding AP and Connect to have the AP’s MAC

address in the field.

Wireless Mode – WDS+AP

When selecting WDS+AP in the Mode drop-down menu, the following section

appears.

Enable Lazy Mode: Tick the check box to enable the Lazy mode. When

enabling the Lazy mode, there is no need to enter the MAC address of any

remote AP.