User's Manual

TRENDnet User’s Guide

TEW750DAP

Access > MAC Filters

This window allows you to configure the MAC address filter. The rules can be set

up to 24 entries.

Configure MAC Filtering below: Select the MAC filtering method. Select Turn

MAC Filtering OFF to disable this feature. Select Turn MAC Filtering ON and

ALLOW computers listed to access the network to enable this feature and

only allow the computers, by MAC address, to access the network. Select Turn

MAC Filtering ON and DENY computers listed to access the network to

enable this feature and only deny the computers, by MAC address, access to the

network.

Checkbox: Tick the check box of each entry to enable the selected rule.

MAC Address: Enter the MAC address to be filtered.

DHCP Client List: Select the DHCP client from the drop-down menu to be

filtered.

Schedule: Select the time schedule for the rule. Click the New Schedule button

to create time schedules.

Click the Save Settings button to accept the changes made.

Click the Don’t Save Settings button to discard the changes made.