User's Manual

TRENDnet User’s Guide

TEW750DAP

Tools > Restart

This window is used to save and restore the configuration, and restart the AP.

Save Settings to Local Hard Drive: Click the Save Configuration button to

download the AP’s settings to the management computers.

Load Settings From Local Hard Drive: Click the Browse button to navigate to

the saved configuration file on the management computer and click the Restore

button to restore the AP’s configuration to the settings configured on the

configuration file.

Restore To Factory Default Settings: Click the Restore Factory Defaults

button to remove all the settings configured on this AP and return the settings to

the factory defaults.

Reboot The Device: Click the Reboot the Device button to reboot the AP. All

unsaved configurations will be discarded.

Tools > Firmware

This window is used to display the current firmware information and initiate a

firmware upgrade for the AP.

Upload: Click the Browse button to navigate to the new firmware file located on

the management computers, and click the Upload button to initiate the firmware

upgrade procedure. The firmware upgrades sometimes will reset the

configuration to the factory defaults. Make sure to save the current configuration

to the management computer, before performing firmware upgrade.