User's Manual

TEW-753DAP User’s Guide System Conguration
© Copyright 2013 TRENDnet. All rights reserved.
19
System
Operaon Mode
You can choose one of the mode to t your network plan: Access Point,
WDS AP, WDS Bridge and Universal Repeater.
Access Point
This is the default operaon mode. Wireless clients,
known as wireless staons (STAs), can wireless associate
with TEW-753DAP and connect to Internet via Ethernet
port.
WDS AP
In this operaon mode. TEW-753DAP wireless connects
to other WDS (Wireless Distribuon System) for backbone
communicaon and provides wireless connecon to
clients (STAs) at the same me.
WDS Bridge
In this operaon mode. TEW-753DAP connects ONLY to
other WDS (Wireless Distribuon System) as a backbone
bridge.
Universal Repeater
TEW-753DAP repeats wireless signal and packets in this
mode for backbone communicaon as well as client
access. This feature is used to expand your exisng
wireless network on places your current access point is
unable to reach. Make sure all the sengs of the TEW-
753DAP matches to your root or connecng wireless
access points, same SSID, channel and wireless encrypon
sengs.
IP Sengs
The TEW-753DAP has a stac IP 192.168.10.100 set in factory for
management purpose. You can change this IP address to t your
network plan. You can also set TEW-753DAP to DHCP client accepng IP
dynamically.