User's Manual

TEW-753DAP User’s Guide System Conguration
© Copyright 2013 TRENDnet. All rights reserved.
21
Spanning Tree Status: Enable or disable 802.1d spanning tree
protocol to avoid network looping
Bridge Hello Time : The me between each bridge protocol
data unit (BPDU). Default: 2 sec.
Bridge Max Age : Maximum me a BPDU kept in bridge.
Default: 20 sec.
Bridge Forward Delay : The me spend in listen and learning
state. Default: 4 sec.
Priority : Priority number for root bridge selecon.
(MAC number is listed on Status > Main
page)
Apply : Click this buon to save and acvate
Cancel : Click this buon to abandon the change
Band Steer
The TEW-753DAP equipped with 2.4GHz and 5GHz wireless interfaces.
When your client device can work on both 2.4GHz and 5GHz wireless,
Band Steer can redirect your 2.4GHz crowded trac to 5GHz band
automacally. To setup band steer, you have to setup the same SSID on
both 2.4GHz and 5GHz. Then check enable band steering on this page.
Click Save�
Save : Click this buon to save the change.
(Save & Reload is required to take eect.)
Cancel : Click this buon to abandon the change